Remove the four M2 x 3-mm screws at the top of the keyboard.
NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the keyboard.
Slide the keyboard toward the back of the computer to disengage the
notch on the keyboard from the tab on the palm rest.
Lift and remove the keyboard.
1
keyboard
2
M2 x 3-mm screws (4)
3
notch on keyboard
4
tab on palm rest
Replacing the Keyboard
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
Insert the six tabs and keyboard connector along the front edge of the
keyboard beneath the front-inside edge of the palm rest.
Align the notch at the top of the keyboard with the tab on the palm rest,
and then lower the keyboard into place.
Applying even pressure to keep the keyboard flat, slide the keyboard
towards the front of the computer to connect the keyboard connector and
secure the six tabs along the front edge of the keyboard beneath the front-
inside edge of the palm rest. Ensure that the tab on the palm rest slides
into the notch at the top of the keyboard.
1
tabs (6)
2
keyboard connector
3
notch on keyboard
4
tab on palm rest
5
palm rest
Replace the four M2 x 3-mm screws at the top of the keyboard.
