Remove the two M2.5 x 5-mm screws at the top of the keyboard.
NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the keyboard.
Lift the keyboard and hold it up and slightly forward to access to the
keyboard connector.
Rotate the keyboard connector latch upward to release the keyboard cable.
Slide the keyboard cable out of the keyboard connector.
1
M2.5 x 5-mm screws (2)
2
keyboard
3
tabs (5)
4
keyboard cable
5
keyboard connector latch
Replacing the Keyboard
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: The key caps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Exercise care when removing and handling the keyboard.
Slide the keyboard cable into the keyboard connector.
Rotate the keyboard connector latch downward to secure the cable.
Hook the tabs along the front edge of the keyboard beneath the front-
inside edge of the palmrest.
Press on the right edge near the top to snap the keyboard into place.
Replace the two M2.5 x 5-mm screws at the top of the keyboard.