= pins 1-2 jumpered
= pins 2-3 jumpered
Red dot denotes pin 1.
| A, pins 1-3 (password) |
 (default) |
Password features are enabled. |
 |
Password features are cleared at the next system boot. | |
| A, pins 4-6 (clear CMOS) |
 (default) |
System setup settings are retained at next system boot. |
 |
System setup settings are cleared at next system boot. After clearing CMOS settings, turn off power and set the jumper back to pins 4-5 (default settings are used at start-up). | |
| B, pins 1-3 (setup access) |
 (default) |
Allows user to enter system setup program. |
 |
Prevents user from entering system setup program. | |
| B, pins 4-6 (reserved) |
 (default) |
No jumper installed. Do not change. |
| C, D (CPU speed) |
  |
Microprocessor's internal speed is 166 MHz. |
  |
Microprocessor's internal speed is 200 MHz. | |
 |
Microprocessor's internal speed is 233 MHz. |