Back to Contents Page
Using the AGP Card Clip: Dell™ Dimension™ 8100 System
Reference
Some computers use an AGP card clip instead of an AGP card brace to secure the AGP card.
To release an AGP card from the AGP card clip:
- Press the lever on the left side of the AGP card clip to release the card from the card connector.
- Release the clip lever after the card clears the connector
pins.
 |
| 1 |
AGP card |
| 2 |
AGP card clip lever |
| 3 |
Connector pins |
| 4 |
Card connector |
|
To secure an AGP card to the AGP clip:
- Align the card with the connector pins while slightly pushing out the
card clip lever with your thumb.
- While continuing to push out the card clip lever, gently press the
card into the card connector until the card is fully seated into place.
- Release the clip lever.
 |
| 1 |
AGP card clip |
| 2 |
Card connector |
| 3 |
Card clip lever |
| 4 |
AGP card |
|
Back to Contents Page
