This manual provides procedures for removing and replacing the components in your computer. Unless otherwise noted, each procedure assumes that the following conditions exist:
You have read the safety information in your Dell™ Product Information Guide.
A component can be replaced by performing the removal procedure in reverse order.
Recommended Tools
The procedures in this document may require the following tools:
Small flat-blade screwdriver
Phillips #0, #1, or #2 screwdriver
Flash BIOS update program (download from support.dell.com)
Turning Off Your Computer
NOTICE: To avoid losing data, save and close any open files and exit any open programs before you turn off your computer.
Shut down the operating system:
Save and close any open files, exit any open programs, click the Start button, and then click
Shutdown.
In the Shut Down Windows window, select Shut Down.
The computer turns off after the operating system shutdown process finishes.
Ensure that the computer and any attached devices are turned off. If your computer and attached
devices did not automatically turn off when you shut down your operating system, press and hold
the power button for 4 seconds.
Before Working Inside Your Computer
Use the following safety guidelines to help protect your computer from potential damage and to help ensure your own personal safety.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins.
NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.
NOTICE: When you disconnect a cable, pull on its connector or on its strain-relief loop, not on the cable itself. Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep them evenly aligned to avoid bending any connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented and aligned.
NOTICE: To avoid damaging the computer, perform the following steps before you begin working inside the computer.
NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components.
Oferta válida en Perú sólo para configuraciones aquí publicadas entre el 3 y el 9 de febrero de 2012 por stock ilimitado y no acumulable con otras promociones. Venta máxima de 5 unidades por orden y cliente. Precios en Nuevos Soles (S/.) incluye IGV y gastos de entrega a domicilio. El peso del producto varía según su configuración. Entrega de equipo solo contra exhibición documento de identidad del comprador.
Su pedido implicará la aceptación de los Términos y Condiciones de Venta, Servicio Técnico y Garantía.
Disponibilidad del Microsoft Office 2010 en español varía por región. Microsoft Office Edición Básica incluye Word, Excel y Outlook. Celeron, Celeron Inside, Core Inside, Intel, logotipo Intel, Intel Atom, Intel Atom Inside, Intel Core, Intel Inside, logotipo Intel Inside, Intel Viiv, Intel vPro, Itanium, Itanium Inside, Pentium, Pentium Inside, Viiv Inside, vPro Inside, Xeon, y Xeon Inside son marcas registradas de Intel Corporation en Estados Unidos y en otros países. Si desea más información en cuanto a la clasificación del procesador Intel, consulte www.intel.com/espanol/go/rating. Dell no tiene derechos sobre otras marcas, nombres comerciales y productos de terceros aquí anunciados.
Dell Peru S.A.C. Av. Navarrete No. 501, Piso 18, San Isidro, Lima, Perú; RUC 20510430655.
