|
Attaching and Removing the Computer Stand: Dell Dimension 4600C
Service Manual
Back to Contents Page
Dell™ Dimension™ 4600C
Service Manual
 Attaching and Removing the Computer Stand
Attaching and Removing the Computer Stand
To attach the stand, perform the following steps.
 |
NOTE: Place your computer on a soft surface to prevent scratching of the top cover.
|
- Rotate the computer to an upside-down position.
- Insert the screw into the bottom of the stand.
- Align the two tabs and the screw in the stand with the tab holes and screw hole in the
bottom of the computer.
- Tighten the screw.
- Place the computer in the upright position.
To remove the stand, perform the following steps.
|
NOTE: Place your computer on a soft surface to prevent scratching of the top cover.
|
- Turn the computer over so that the stand is at the top.
- Loosen the screw and lift the stand away.
- Place the computer in a horizontal position until you reattach the stand.
Back to Contents Page
| 
