Dell Dimension 4500C
System Board Connectors and Sockets
IDE Interface Cable Connections for Dell-Installed Drives
Placement of Dell-Installed Cards
|
CAUTION: Before you begin any of the procedures in this section, see "Safety Instructions" in your Owner's Manual. |
![]() |
NOTICE: Be careful when opening the computer cover to ensure that you do not inadvertently disconnect cables from the system board. |
The 160-W power supply can operate from an AC power source supplying 90-135 VAC or 180-265 VAC at 47-63 Hz. The power supply provides the DC operating voltages and currents listed in the following table.
|
Pin Number |
Signal Name |
18-AWG Wire |
|---|---|---|
1 | COM | Black |
2 | COM | Black |
3 | +12 VDC | Yellow |
4 | +12 VDC | Yellow |
|
Pin Number |
Signal Name |
18-AWG Wire |
|---|---|---|
1 | +12 VCD | Yellow |
2 | COM | Black |
3 | COM | Black |
4 | +5 VDC | Red |
|
Pin Number |
Signal Name |
22-AWG Wire |
|---|---|---|
1 | +5 VCD | Red |
2 | COM | Black |
3 | COM | Black |
4 | +12 VDC | Yellow |
|
Card Connector |
Card Description |
|---|---|
AGP connector |
Video |
PCI1 connector |
PCI Card |