Manuals

Card Guide Removal (Mini Tower): Dell Precision™ WorkStation 210 Systems

1. Press in with your thumb on the outer side of the card guide.
   This releases the outer tab from the chassis.
2. Pull the released side of the card guide away from the chassis.
   The outer side of the card guide swings away from the chassis.
3. Slide the control panel cable up out of the slot in the card guide.
4. With the outer side of the card guide away from the chassis, you can then pull the card guide back and out of the chassis, which releases the inner two tabs.

NOTE: Some older PCI and other types of cards may be so long that you cannot remove the card guide until you first remove the cards. Most newer cards are not long enough to interfere with card guide removal.