Back to Contents Page

Setting Up Your Monitor

Dell™ 3007WFP Flat Panel Monitor

  Connecting Your Monitor

  Installing the Utility Tool (Microsoft^® Windows^® Operation Systems)

  Using the Front Panel Buttons

  Using the OSD

  Using the Dell Soundbar (Optional)

Connecting Your Monitor

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions.

1.	Turn off your computer and unplug the power cord.
2.	Connect the white connector end of the DVI cable attached on the monitor to the connectors on the computer.
3.	Connect the USB cable that was included with your monitor to the computer and the upstream USB connector on the monitor. Once this cable is connected to the computer and the monitor, you can use the USB downstream on the monitor.
4.	Connect any USB devices.
5.	Connect the power cord.
6.	Turn on your monitor and computer. If you do not see an image, see Troubleshooting Your Monitor. Troubleshooting.
	NOTE: The Monitor will display full screen in White, Black, Red, Green and Blue color rolling pattern on screen if the DVI cable is not connected. This self test pattern will be displayed continually when Monitor detects that DVI cable from Monitor to PC is not connected.

Installing the Utility Tool (Microsoft^® Windows^® Operation Systems)

The setup.exe application tool launcher provided in the CD allows you to the install utility tool on the computer. This feature queries the monitor for the brightness parameter and displays the adjustment range bar on the screen.

1.	Insert the CD into the CD drive.
2.	Open the Drivers folder and double-click setup.exe.
	Ensure that the USB cable is connected between the monitor and the computer.
3.	The install Shield wizard will launch the application tool. Click Next to countinue.
4.	Select Accept the license agreement and click Next.
5.	Click Install to complete the installation. After the installation is complete, click Finish.

You are now ready to view adjustment range bar while adjusting the brightness on the monitor.

Using the Front Panel Buttons

Use the buttons on the front of the monitor to adjust the image settings. 

Down (-) and Up (+)	Touch - or + to activate the on-screen display (OSD). Use these buttons to decrease/increase the brightness ranges.
Power Button and Indicator	Use the  power button to turn the monitor on and off. The blue light  indicates the monitor is on and fully functional. An amber light indicates power save mode.

Using the OSD

NOTE: If  you make an adjustment, the monitor automatically saves any adjustments you have made.

Icon	Brightness bar	Description
	Brightness	Brightness adjusts the  luminance of the monitor. Press  the + button to increase luminance and press  the - button to decrease luminance (min 0 ~ max 20).

NOTE: OSD generate from PC application F/W through the upstream port of USB to make sure the USB cable connect well.

Using the Dell Soundbar (Optional)

The Dell Soundbar is a four-speaker, two-channel speaker that can be attached to your monitor.  Located on the Soundbar are a: Rotary volume and on/off control to adjust the overall system level, a green LED for power indication, and two audio headset jacks.

Soundbar Attachment to the Monitor

NOTICE: Do not use the soundbar power connector with any other device.

1.	Attach the Soundbar by aligning the two slots on the Soundbar with the two tabs on the bottom of the monitor.
2.	Slide the Soundbar to the left until it snaps in to place.
3.	Plug in the power cord from the Soundbar in to the connector on the back of the monitor.
4.	Insert the green stereo plug from the Soundbar in to your computer's audio output connector.

Back to Contents Page