CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To guard yourself against an electrical shock, always unplug your computer from the electrical outlet before removing the cover.
NOTICE: Ensure that sufficient space exists to support the system with the cover removed—at least 30 cm (1 ft.) of desktop space.
Remove the stand by lifting the computer from the stand.
Place the computer horizontally and remove the screw.
NOTICE: To avoid scratches during this procedure, place the computer on a mat.
Place the computer vertically and pull the sleeve gently towards the back
of your computer.
Remove the screw located at the back of the computer. Slide the cover
towards the back of the computer and pivot the cover up, away from the
computer.
Installing the Computer Cover
Ensure that all the cables are connected and that no tools or extra parts
(including screws) are left inside the computer.
Pivot the cover down and into position.
Push the cover until it clicks into place.
Replace the screw at the back of the computer.
NOTICE: To avoid scratches during this procedure, place the computer on a mat.
To insert the sleeve, place the computer vertically and push the sleeve
gently towards the front of your computer.
Now place the computer horizontally and insert the screw.
To attach the stand, align the securing tabs on the stand with the slots
on the computer. Lower the computer onto the stand until the securing
tabs are inserted into the slots.
Connect your computer and devices to electrical outlets, and turn them
on.
