|
Jumpers : TSST TS-H292B CD-R/RW Drive User's Guide
Back to Contents Page
Jumpers : TSST TS-H292B CD-R/RW Drive User's Guide
Jumper Locations •
Jumper Settings
Set the jumpers on the back of the drive in accordance with the configuration of your
computer system. The jumpers are preset to the CSEL position.
| Jumper |
Setting |
Description |
| Master (MA) |
 |
Configures the drive as the master.
Set the CD-R/RW drive as master if the drive is the only device connected to the E-IDE card. |
| Slave (SL) |
 |
Configures the drive as the slave.
Set the CD-R/RW drive as slave if the drive is daisy-chained with a hard-disk drive on an E-IDE card. |
| CSEL (CS) |
 |
Configures the drive by using host interface signal CSEL (Cable Select).
This is the default setting for Dell desktop and workstation systems. |
 |
NOTE: Do not use any other jumper setting. |
Please read all restrictions and disclaimers.
Back to Contents Page
| 
