|
Connectors : Creative PC-DVD Encore Dxr2 User's Guide
Back to Contents Page
Connectors: Creative PC-DVD™ Encore Dxr™2 User's Guide
PC-DVD Drive • Dxr2
Decoder Card
|
NOTE: The appearance of your PC-DVD drive's back
panel may differ slightly from Figure 1. |
Figure 1. Connectors on the PC-DVD Encore (Back Panel)
| 1 |
Digital audio connector |
| 2 |
CD audio connector |
| 3 |
Master/slave jumper |
| 4 |
Enhanced IDE data connector |
| 5 |
Power in connector |
Dxr2 Decoder Card
Figure 2. Connectors on the Dxr2
Decoder Card
| 1 |
Monitor Out connector |
Connects to the VGA monitor using the VGA
monitor cable, allowing you to send video signals from the Dxr2 decoder card to the VGA
monitor. |
| 2 |
VGA In connector |
Connects to the video graphics array
(VGA) card in your computer using the VGA loopback cable. The loopback cable sends video
signals from the VGA card to the Dxr2 decoder card (cable provided). |
| 3 |
TV Out jack |
Connects to your television monitor using
the TV Out cable (cable provided). |
| 4 |
Dolby Digital (AC-3) S/PDIF jack |
Connects an external Dolby Digital device
that supports AC-3 specifications (cable not provided). |
| 5 |
Audio Out connector |
Connects to the CD audio connector of
your audio card (cable provided). |
| 6 |
Audio In connectors |
Connects to your PC-DVD drive and/or
CD-ROM drive (cable provided). |
Please read all restrictions
and disclaimers.
Back to Contents Page
| 
