|
 | | | |
Installing Data CLI: Dell OpenManage Data CLI for NT Installation and Operation
Back to Contents Page
Installing Data CLI: Dell OpenManage™ Data CLI
for NT Installation and Operation
Overview • Hardware
and software requirements • Data CLI
Installation
This chapter describes the following:
- Hardware and software requirements
- Data CLI Installation
- Removing Data CLI
To use Data CLI, the host must meet the following requirements:
- A PC running Windows NT 4.0
- A configured TCP/IP network connection to any remote Data Agent that will be managed
 |
NOTE: You should install the Data CLI on
only one NT host in your network. We recommend that you install the Data CLI on the
management station. |
The Dell Managed Node CD contains three Dell OpenManage™ Data software packages:
Data CLI, Data Agent, and Data Integrator. You can install them all or select which you
want to install. You must install Data Agent on all servers with arrays that you will
manage. If you will manage them from the Dell NNM SE, you must also install Data
Integrator on these servers. The procedure in this section assumes that you want to
install just Data CLI. If you want to install the other packages along with Data CLI, use
the installation procedure in the Dell OpenManage™ Data Agent for NT
Installation and Operation Guide (P/N 3967C).
If a version of the Managed Node software is already installed, remove it as described
next before installing Data CLI.
To remove the Managed Node software from the management station or an array server
|
NOTE: The Managed Node software consists of
the Data Agent, Data CLI, or Data Integrator, whichever of the three were installed. |
- Log on to the server as Administrator or someone who has administrative privileges.
- From the windows NT taskbar, follow the path
Start � Dell OpenManage™
� PowerVault™ Manager � Data Managed Node � Data Managed Node Unistall
In the Confirmation window that opens, click the Yes button to confirm the removal of
Data Managed Node software.
In the Remove Programs From Your Computer window, click the OK button when the Uninstall
is successfully completed.
You have removed the Data Managed Node software from the management station or
array server.
|
NOTE: The C:\Program Files\Dell
OpenManage™ folder is not removed. If you want to remove it, you must do it
manually using Microsoft Explorer. |
To install Data CLI on the management station or an array server
- At the management station or array server, log in as Administrator or the equivalent.
- Insert the Data Managed Node CD into the server's CD drive.
The installation starts automatically, and after about a minute the Managed Node
window opens and displays the following Welcome window.
Figure 2-1. Managed Node Welcome window
If you do not see the Managed Node Welcome screen, follow these steps:
- From the Windows NT task bar, follow this path
Start � Run
In the Run window, enter the following program name, and then click the OK button:
drive\setup.exe
where drive is the letter for the CD drive, which is usually D.
In the Welcome window, click the Next button
In the Software License Agreement window, read the license agreement and then click the
Yes button to accept the agreement and continue the installation.
In the User Information window, make sure that the Name and Company entries are correct,
and click the Next button.
In the Choose Destination Location window, either click the Next button to accept the
default location or enter or select a different pathname, and then click the Next button.
C:\Program Files\Dell Open Manage\PowerVault™ Manager\Data Managed Node is the
default location directory where the software will be installed.
In the Setup Type window, select Custom.
In the select Components window, select Dell OpenManage™ Data CLI, and click the
Next button.
In the Select Program Folder window, either click the Next button to accept the default
folder or enter or select a different folder, and then click the Next button.
Data Managed Node is the default folder where the Data Agent program icons will be
installed.
In any information window that opens, click the OK button.
In the Setup Complete window, click the Finish button
Remove the Data Managed Node CD from the management station's CD drive.
You have completed the Data CLI installation.
|
NOTE: Any user who can access the management
station can change or delete the Data CLI files you just installed. If you want to change
the permissions on these files, refer to the CLI Release Notice for information on what
the permissions should be. |
Back to Contents Page
|
|
|
