The remote access controller (RAC) is a system component that provides a full set of system management capabilities. Server Administrator integrates the RAC
features into its interface, allowing users to view and manage the controller
from within Server Administrator and Dell OpenManage IT Assistant.
NOTE: Some features documented may not be available on your system's RAC. For example, dial-up modem use is supported only on DRAC III.
NOTE: The commands are available only on systems with DRAC III, DRAC III/XT, ERA, and ERA/O (not for systems with DRAC 4 and DRAC 5).
The omreport rac command enables Server Administrator to display reports on RAC components.
Conventions for Parameter Tables
Parameter tables list input parameters for a command in the order in which they appear in the command line interface. In "omreport rac: Viewing Remote Access Controller Components," the parameters are listed in the order in which you must configure them.
The symbol |, often called pipe, is the logical exclusive or operator. For example, enable | disable means that you can enable or disable the component or feature, but you cannot simultaneously enable and disable the component or feature.
omreport rac Command Summary
NOTE: Although this section lists all possible omreport raccommands, the commands available on your system depend on your system configuration. If you try to get help or execute a command for a component that is not installed on your system, Server Administrator issues a message that the component or feature is not found on the system.
Table 6-1 is a high-level summary of the omreport rac command. The column titled "Command level 3" lists the major arguments that can be used with omreport rac. "User privilege required" refers to the type of privilege you need to perform the command, where U=User, P=Power User, and A=Administrator. "Use" is a very general statement about the actions that can be performed using the omreport rac command. More details about syntax and use of the command appear later in this section.
Enables or disables user access to the RAC based on how the Administrator has set up each user's local operating system user account privileges.
dialinusers
U, P, A
Displays the dial-in user properties.
dialoutusers
U, P, A
Displays the dial-out user properties.
network
U, P, A
Displays the onboard NIC properties.
modem
U, P, A
Displays the onboard modem properties.
remote
U, P, A
Displays the remote features properties.
snmptraps
U, P, A
Displays the SNMP trap properties.
users
U, P, A
Displays the user name properties.
viewcertificate
U, P, A
Displays the server or CA certificate.
Help With the omreport rac Command
Use the omreport rac -? command to get a list of the available commands for omreport rac.
omreport rac authentication
Use theomreport rac authentication command to determine whether local operating system authentication of users is enabled or disabled for the RAC.
The RAC has two methods of authenticating user access: RAC authentication and local operating system authentication. RAC authentication is always enabled. Administrators can set up specific user accounts and passwords that allow access to the RAC.
Operating systems also require administrators to define different levels of users and user accounts; each user level has different privileges. Local operating system authentication on the RAC is an option for administrators who do not want to define one set of privileges for users in the operating system and a separate set of users and accounts for the RAC. If you enable local operating system authentication for the RAC, you enable any user with Administrator status on the operating system to log into the RAC.
Example Command for omreport rac authentication
When you type:
omreport rac authentication
the results that display show whether authentication of users for access to the RAC using the operating system user access definitions is disabled or enabled. For example:
omreport rac authentication
localauthenable=true
omreport rac dialinusers
Use the omreport rac dialinusers command to display the dial-in user property values. Table 6-2 displays the valid parameters for the command.
Table 6-2. omreport rac dialinusers
name=value pair
Description
username=<text>
Displays the dial-in user entry whose user name is specified by <text>.
index=<n>
Displays the dial-in user entry whose index is equal to n. The index is usually 015, and specifies one of the 16 user positions on the RAC.
NOTE: The index number corresponds to a user position on the RAC.
omreport rac dialoutusers
The omreport rac dialoutusers command displays the demand dial-out user property values. Table 6-3 displays the valid parameters for the command.
Table 6-3.
omreport rac dialoutusers
name=value pair
Description
ipaddr=<text>
Displays the demand dial-out user entry whose IP address is specified by <text>. This address is the IP address that the RAC calls back after being contacted by a demand dial-out user.
index=<n>
Displays the demand dial-out user entry whose index is equal to n. The index is usually 0 to 15 and specifies one of the 16 user positions on the RAC.
NOTE: The index number corresponds to a user position on the RAC.
omreport rac network
Use the omreport rac network command to display the NIC property values.
omreport rac modem
Use the omreport rac modem command to display the onboard modem property values.
omreport rac remote
Use the omreport rac remote command to display the remote features property values.
omreport rac snmptraps
Use the omreport rac snmptraps command to display the SNMP trap property values. Table 6-4 displays the valid parameters for the command.
Table 6-4. omreport rac snmptraps
name=value pair
Description
ipaddr=<text>
Displays the trap entry whose IP address is specified by <text>.
index=<n>
Displays the trap entry whose index is equal to n. The index is usually 0 to 15 and specifies one of the 16 trap positions on the RAC.
NOTE: The index number corresponds to the trap position on the RAC.
omreport rac users
Use the omreport rac users command to display the RAC user name properties. Table 6-5 displays the valid parameters for the command.
Table 6-5. omreport rac users
name=value pair
Description
username=<text>
Displays the RAC user entry whose user name is specified by <text>.
index=<n>
Displays the RAC user entry whose index is equal to n. The index is usually 0 to 15 and specifies one of the 16 user positions on the RAC.
NOTE: The index number corresponds to the user position on the RAC.
omreport rac viewcertificate
Use the omreport rac viewcertificate command to view the server or certificate authority (CA) certificate on the RAC. The only parameter you must specify is whether the certificate you want to view is a CA certificate or a server certificate. Table 6-6 displays the valid parameters for the command.
Table 6-6. omreport rac viewcertificate
name=value pair
Description
type=server | ca
Indicates whether the certificate you are viewing is a server certificate or a CA certificate.
In the sample output that follows, the subject is the company or organization that is requesting the certificate signature. The issuer is the organization that is granting the certificate.
The following example is sample output from the command omreport rac viewcertificate type=ca:
Ofertas limitadas, por linha de produto, a 03 unidades para pessoa física, seja por aquisição direta e/ou entrega a ordem, e que não tenha adquirido equipamentos Dell nos últimos 04 meses, e 05 unidades para pessoa jurídica ou grupo de empresas com até 500 funcionários registrados. Os serviços de suporte pós-garantia e/ou outros serviços serão faturados em nota fiscal específica de prestação de serviços. Valores com frete não incluso. Preços com impostos para a cidade de São Paulo. Preços e condições serão válidos desde que não haja mudança, até a data de emissão da nota fiscal, da carga tributária, de preços de insumos, da cotação PTAX/BACEN do dólar norte-americano da data de conclusão do pedido, superior a 3% para insumos importados, ou outros fatores fora do controle da Dell. Clique aqui e obtenha maiores informações sobre as condições de pagamento. A partir de 01 de setembro de 2009 a Dell Computadores do Brasil emitirá a Nota Fiscal Eletrônica. Clique aqui para mais detalhes.
Promoção válida somente para a oferta anunciada e para as 100 primeiras unidades vendidas.
Em até 3 dias úteis contados do recebimento do pedido de compra on-line pela Dell, o cliente receberá um e-mail confirmando as condições de seu pedido. A Dell se reserva o direito de rever/corrigir o preço e as demais condições do negócio, comunicando ao cliente essa retificação, o qual, se não quiser manter o pedido nessa hipótese, deverá informar a Dell em até 5 dias úteis contados do recebimento da comunicação de retificação. A Dell reserva-se o direito de não concluir a venda se os equipamentos forem adquiridos para revenda.
Garantia: Garantia legal inclusa no prazo total de garantia. A garantia limitada inclui peças e mão-de-obra, sendo restrita aos produtos Dell. Os produtos de outras marcas estão sujeitos aos termos de garantia dos respectivos fabricantes. Na Garantia em Rede Autorizada, o serviço padrão é de 01 ano (incluída a garantia legal), em que o cliente, após contato telefônico com o Suporte Técnico da Dell, deverá encaminhar o seu equipamento à assistência técnica autorizada mais próxima de sua residência ou encaminhar pelos Correios, sem ônus, desde que seja guardada a caixa original do produto. Clique aqui para mais detalhes. Na Garantia à Domicílio, técnicos serão deslocados, se necessário, após consulta telefônica. O tempo de resposta dependerá da sua região geográfica e da disponibilidade imediata de recursos. Consulte o seu representante de vendas em caso de dúvida sobre qual é a garantia do seu equipamento. Baterias de notebooks têm garantia de 1 ano. Lâmpadas dos projetores têm garantia de 90 dias. Para maiores detalhes clique aqui. A Dell não fornece garantia nem suporte técnico para FreeDOS™ nem qualquer outro sistema operacional ou aplicativo que não tenha sido instalado pela própria Dell nos computadores n Series. A Dell não garante a compatibilidade entre qualquer sistema operacional e os sistemas n Series. Para maiores informações sobre a Política de Devoluções da Dell clique aqui.
CompleteCare: Serviço de assistência técnica opcional, que cobre manutenção e substituição em caso de danos acidentais não cobertos pela garantia limitada, incluindo derramamentos, quedas, aumentos na tensão e quebra, e excluindo danos causados por atos intencionais, como fogo, roubo e perda clique aqui.
Wireless: Para a utilização da conectividade sem fio ("wireless") é necessária a aquisição de um roteador "wireless" e do serviço de banda larga no local de acesso ou da disponibilidade deste serviço em locais públicos.
Os softwares ofertados estão sujeitos aos Termos e Condições da Licença de Uso do Fabricante. Para maiores informações, consulte o site do fabricante.
Celeron, Celeron Inside, Centrino, Logotipo Centrino, Core Inside, Intel, Logotipo Intel, Intel Core, Intel Inside, Logotipo Intel Inside, Intel Viiv, Intel vPro, Itanium, Itanium Inside, Pentium, Pentium Inside, Xeon, e Xeon Inside são marcas registradas da Intel Corporation nos Estados Unidos e em outros países.