Alert Monitoring and Logging Go to Table of Contents for Storage Management Online Help
Dell OpenManage™ Storage Management User's Guide
SNMP Support for Storage Management Alerts
Alert Descriptions and Corrective Actions
Storage Management's alert or event management features let you monitor the health of storage resources such as controllers, channels, array disks, and virtual disks.
The Disk Management Service performs alert monitoring and logging. By default, the Disk Management Service starts when the managed system starts up. If you stop the Disk Management Service, then alert monitoring and logging stops. Alert monitoring does the following:
 |
Note: Storage Management does not log alerts regarding the data I/O path. These alerts are logged by the respective RAID drivers in the system alert log. |
Storage Management generates alerts that are added to the Windows application alert log and to the Server Administrator Alert log. To view these alerts in Server Administrator:
You can also view these alerts in the Microsoft Windows Event Viewer.
Every alert consists of the following:
Each alert message in the Storage Management alert log has a severity level. The severity level is displayed in the Severity field of the alert message. The severity level indicates the nature of the alert.
The alert severity levels are as follows:
By default, Storage Management installs SNMP trap forwarding support. For this support to function, you should have SNMP installed on the managed system prior to installing Storage Management.
|
Note: For more information on installation requirements and SNMP, refer to the Server Administrator documentation. |
The alerts displayed in the Storage Management alert log are forwarded to the Windows application alert log. If you have SNMP installed on the managed system (and the SNMP service is running), the Storage Management alerts in the Windows application alert log will be forwarded as SNMP traps. In order for these traps to be viewable, however, a target system or application must be configured to receive these traps. SNMP traps that are generated by Storage Management can be viewed in any standard SNMP-compatible enterprise management console.
The Windows SNMP service must be configured to forward the SNMP traps to the target system or application. When forwarding to an application, the application should also be configured to receive the SNMP traps. The IT Assistant application is already configured to receive the SNMP traps generated by Storage Management.
Refer to your Windows operating system documentation for information on configuring the operating system to forward SNMP traps. This information may be located under such topics as "setting up SNMP" or "SNMP traps." When configuring SNMP for Windows, be sure that the SNMP traps are forwarded to the correct server. For information on configuring an application to receive SNMP traps, refer to the documentation for that application.
The Storage Management management information base (MIB) defines the SNMP traps that Storage Management generates. These traps correspond to the alerts documented in the "Alert Descriptions and Corrective Actions" section. The MIB is located in a subdirectory of the Storage Management installation directory. The subdirectory location for the MIB is ..\sm\mibs\dcstorag.mib.
|
Note: Storage Management supports trap forwarding on both 32-bit and 64-bit operating systems. |
The Storage Management SNMP traps use a set of variables that are included with every trap. These variables are the following:
SNMP traps that are generated by Storage Management can be viewed in any standard SNMP-compatible enterprise management console. These traps are defined in the Storage Management management information base (MIB). These traps correspond to the alerts documented in the "Alert Descriptions and Corrective Actions" section. For more information on the MIB and its structure, as well as a change history of the SNMP traps, see the document titled Dell OpenManage Storage Management MIB Structure.
For more information on configuring SNMP, see SNMP Support for Storage Management Alerts.
The following sections describe alerts generated by the RAID or SCSI controllers supported by Storage Management. The alerts are displayed in the Server Administrator Alert subtab or through Windows Event Viewer. These alerts can also be forwarded as SNMP traps to other applications.
SNMP traps are generated for the alerts listed in the following sections. These traps are included in the Storage Management management information base (MIB). For more information on SNMP support and the MIB, see SNMP Support for Storage Management Alerts.
To locate an alert, scroll through the following sections to find the alert number displayed on the Server Administrator Alert tab or search this HTML file for the alert message text or number.
Cause: A physical disk in the array failed. The failed disk may have been identified by the controller or channel. Performing a consistency check can also identify a failed disk.
Action: Replace the failed array disk. You can identify which disk has failed by locating the disk that has a red "X" for its status. Perform a rescan after replacing the disk.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 754, 804, 854, 904, 954, 1004, 1054, 1104, 1154, 1204. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP traps for this alert use all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 500
|
Note In certain circumstances, this alert is not generated when an array disk fails. See for Array Disk State, Alert Messages and Hot Spares on PERC 3/SC, 3/DCL, 3/DC, 3/QC, 4/SC, 4/DC, 4e/DC, 4/Di, 4e/Si, 4e/Di, and CERC ATA100/4ch Controllers for more information. |
Cause: A physical disk has been removed from the array. A user may have also executed the Prepare to Remove task. This alert can also be caused by loose or defective cables or by problems with the enclosure.
Action: If a physical disk was removed from the array, either replace the disk or restore the original disk. You can identify which disk has been removed by locating the disk that has a red "X" for its status. Perform a rescan after replacing or restoring the disk. If a disk has not been removed from the array, then check for problems with the cables. See the Cables attached correctly section for more information on checking the cables. Make sure that the enclosure is powered on. If the problem persists, check the enclosure documentation for further diagnostic information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 501
Cause: A physical disk in the array is offline. A disk can be made offline during a Prepare to Remove operation or because a user manually put the disk offline.
Action: Perform a rescan. You can also select the offline disk and perform a Make Online operation.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 502
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 504
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 505
Cause: A virtual disk has been deleted. Performing a Reset Configuration may detect that a virtual disk has been deleted and generate this alert.
Action: None.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 1203. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 506
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 507
Cause: One or more physical disks included in the virtual disk have failed. If the virtual disk is non-redundant (does not use mirrored or parity data), then the failure of a single physical disk can cause the virtual disk to fail. If the virtual disk is redundant, then more physical disks have failed than can be rebuilt using mirrored or parity information.
Action: Create a new virtual disk and restore from a backup.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 1204. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 508
Cause 1: This alert message occurs when a physical disk included in a redundant virtual disk fails. Because the virtual disk is redundant (uses mirrored or parity information) and only one physical disk has failed, the virtual disk can be rebuilt.
Action 1: Configure a hot spare for the virtual disk if one is not already configured. Rebuild the virtual disk. When using an SS 2/SC, 3/SC, 2/DC, 3/DCL, 3/DC, 3/QC, 4/SC, 4/DC, 4e/DC, 4/Di, or CERC ATA100/4ch controller, rebuild the virtual disk by first configuring a hot spare for the disk, and then initiating a write operation to the disk. The write operation will initiate a rebuild of the disk.
Cause 2: A physical disk in the array has been removed.
Action 2: If a physical disk was removed from the array, either replace the disk or restore the original disk. You can identify which disk has been removed by locating the disk that has a red "X" for its status. Perform a rescan after replacing the disk.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 1203. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 509
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 520
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 521
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 523
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 525
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 526
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 527
Cause: The check consistency operation cancelled because a physical disk in the array has failed or because a user cancelled the check consistency operation.
Action: If the physical disk failed, then replace the physical disk. You can identify which disk failed by locating the disk that has a red "X" for its status. Perform a rescan after replacing the disk. When performing a consistency check, be aware that the consistency check can take a long time. The time it takes depends on the size of the physical disk or the virtual disk.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 529
Cause: The virtual disk initialization cancelled because a physical disk included in the virtual disk has failed or because a user cancelled the virtual disk initialization.
Action: If a physical disk failed, then replace the physical disk. You can identify which disk has failed by locating the disk that has a red "X" for its status. Perform a rescan after replacing the disk. Restart the format array disk operation. Restart the virtual disk initialization.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 532
Cause: A user has cancelled the rebuild operation.
Action: Restart the rebuild operation.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 536
Cause: An array disk included in the virtual disk failed or there is an error in the parity information. A failed array disk can cause errors in parity information.
Action: Replace the failed array disk. You can identify which disk has failed by locating the disk that has a red "X" for its status. Rebuild the array disk. When finished, restart the check consistency operation.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 1204. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 538
Cause: An array disk included in the virtual disk has failed or a user has cancelled the initialization.
Action: If an array disk has failed, then replace the array disk.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 1204. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 541
Cause: The array disk has failed or is corrupt.
Action: Replace the failed or corrupt disk. You can identify a disk that has failed by locating the disk that has a red "X" for its status. Restart the initialization.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 904. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 542
Cause: An array disk included in the virtual disk has failed or is corrupt. A user may also have cancelled the reconfiguration.
Action: Replace the failed or corrupt disk. You can identify a disk that has failed by locating the disk that has a red "X" for its status. If the array disk is part of a redundant array, then rebuild the array disk. When finished, restart the reconfiguration.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 1204. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 543
Cause: An array disk included in the virtual disk has failed or is corrupt. A user may also have cancelled the rebuild.
Action: Replace the failed or corrupt disk. You can identify a disk that has failed by locating the disk that has a red "X" for its status. Restart the virtual disk rebuild.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 1204. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 544
Cause: An array disk included in the virtual disk has failed or is corrupt. A user may also have cancelled the rebuild.
Action: Replace the failed or corrupt disk. You can identify a disk that has failed by locating the disk that has a red "X" for its status. Rebuild the virtual disk rebuild.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 904. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 545
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 547
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 548
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 550
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 551
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 552
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 553
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 554
Cause: The array disk is predicted to fail. Many array disks contain Self Monitoring Analysis and Reporting Technology (S.M.A.R.T.). When enabled, SMART monitors the health of the disk based on indications such as the number of write operations that have been performed on the disk.
Action: Replace the array disk. Even though the disk may not have failed yet, it is strongly recommended that you replace the disk. Review the message text for additional information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 570
Cause: An array disk has failed, is corrupt, or is otherwise experiencing a problem.
Action: Replace the array disk. Even though the disk may not have failed yet, it is strongly recommended that you replace the disk. Review the message text for additional information. If the array disk has already failed, see Replacing a Failed Disk for more information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 571
Cause: A user has assigned an array disk as a global hot spare. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 574
Cause: A user has unassigned an array disk as a global hot spare. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 575
Cause: The array disk enclosure is too hot. A variety of factors can cause the excessive temperature. For example, a fan may have failed, the thermostat may be set too high, or the room temperature may be too hot.
Action: Check for factors that may cause overheating. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot. Refer to the enclosure documentation for more diagnostic information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 1053. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 591
Cause: The array disk enclosure is too cool.
Action: Check whether the thermostat setting is too low and whether the room temperature is too cool.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 1053. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 592
Cause: The array disk enclosure is too hot. A variety of factors can cause the excessive temperature. For example, a fan may have failed, the thermostat may be set too high, or the room temperature may be too hot.
Action: Check for factors that may cause overheating. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot. Refer to the enclosure documentation for more diagnostic information.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 1054. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 593
Cause: The array disk enclosure is too cool.
Action: Check whether the thermostat setting is too low and whether the room temperature is too cool.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 1054. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 594
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1151. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 581
Cause: This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1151. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 582
Cause: A disk on the specified controller has received a SMART alert (predictive failure) indicating that the disk is likely to fail in the near future.
Action: Replace the disk that has received the SMART alert. If the array disk is a member of a non-redundant virtual disk, then back up the data before replacing the disk. Removing an array disk that is included in a non-redundant virtual disk will cause the virtual disk to fail and may cause data loss.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 585
Cause: A disk has received a SMART alert (predictive failure) after a configuration change. The disk is likely to fail in the near future.
Action: Replace the disk that has received the SMART alert. If the array disk is a member of a non-redundant virtual disk, then back up the data before replacing the disk. Removing an array disk that is included in a non-redundant virtual disk will cause the virtual disk to fail and may cause data loss.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 904. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 586
Cause: A disk has received a SMART alert (predictive failure). The disk is likely to fail in the near future.
Action: Replace the disk that has received the SMART alert. If the array disk is a member of a non-redundant virtual disk, then back up the data before replacing the disk. Removing an array disk that is included in a non-redundant virtual disk will cause the virtual disk to fail and may cause data loss.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 587
Cause: A disk has reached an unacceptable temperature and received a SMART alert (predictive failure). The disk is likely to fail in the near future.
First Action: Determine why the array disk has reached an unacceptable temperature. A variety of factors can cause the excessive temperature. For example, a fan may have failed, the thermostat may be set too high, or the room temperature may be too hot or cold. Verify that the fans in the server or enclosure are working. If the array disk is in an enclosure, you should check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot. Refer to the enclosure documentation for more diagnostic information.
Second Action: If you cannot identify why the disk has reached an unacceptable temperature, then replace the disk. If the array disk is a member of a non-redundant virtual disk, then back up the data before replacing the disk. Removing an array disk that is included in a non-redundant virtual disk will cause the virtual disk to fail and may cause data loss.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 588
Cause: A disk is degraded and has received a SMART alert (predictive failure). The disk is likely to fail in the near future.
Action: Replace the disk that has received the SMART alert. If the array disk is a member of a non-redundant virtual disk, then back up the data before replacing the disk. Removing an array disk that is included in a non-redundant virtual disk will cause the virtual disk to fail and may cause data loss.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 589
Cause: A disk has received a SMART alert (predictive failure) due to test conditions.
Action: None.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 590
Description: Enclosure was shut down.
Cause: The array disk enclosure is either hotter or cooler than the maximum or minimum allowable temperature range.
Action: Check for factors that may cause overheating or excessive cooling. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot or too cold. Refer to the enclosure documentation for more diagnostic information.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 854. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 602
Description: A consistency check on a virtual disk has been paused (suspended).
Cause: The check consistency operation on a virtual disk was paused by a user.
Action: To resume the check consistency operation, right-click the virtual disk in the Storage Management tree view and select Resume Check Consistency.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 604
Description: A consistency check on a virtual disk has been resumed.
Cause: The check consistency operation on a virtual disk has resumed processing after being paused by a user.
Action: This alert is provided for informational purposes.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 605
Description: A virtual disk and its mirror have been split.
Cause: A user has caused a mirrored virtual disk to be split. When a virtual disk is mirrored, its data is copied to another virtual disk in order to maintain redundancy. After being split, both virtual disks retain a copy of the data, although because the mirror is no longer intact, updates to the data are no longer copied to the mirror.
Action: This alert is provided for informational purposes.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 606
Description: A mirrored virtual disk has been unmirrored.
Cause: A user has caused a mirrored virtual disk to be unmirrored. When a virtual disk is mirrored, its data is copied to another virtual disk in order to maintain redundancy. After being unmirrored, the disk formerly used as the mirror returns to being an array disk and becomes available for inclusion in another virtual disk.
Action: This alert is provided for informational purposes.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 607
Description: Change write policy
Cause: A user has changed the write policy for a virtual disk.
Action: This alert is provided for informational purposes.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 601
Description: Enclosure firmware mismatch
Cause: The firmware on the EMM modules is not the same version. It is required that both modules have the same version of the firmware. This alert may be caused when a user attempts to insert an EMM module that has a different firmware version than an existing module.
Action: Download the same version of the firmware to both EMM modules.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 853 . See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 672
Description: Device returned to normal
Cause: A device that was previously in an error state has returned to a normal state. For example, if an enclosure became too hot and subsequently cooled down, then you may receive this alert.
Action: This alert is provided for informational purposes.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 752, 802, 852, 902, 952, 1002, 1052, 1102, 1152, 1202. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP traps for this alert use all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: Redundancy degraded
Cause: One or more of the enclosure components has failed. For example, a fan or power supply may have failed. Although the enclosure is currently operational, the failure of additional components could cause the enclosure to fail.
Action: Identify and replace the failed component. To identify the failed component, select the enclosure in the tree view and click the Health subtab. Any failed component will be identified with a red X on the enclosure's Health subtab. Alternatively, you can select the Storage object and click the Health subtab. The controller status displayed on the Health subtab indicates whether a controller has a failed or degraded component. See the enclosure documentation for information on replacing enclosure components and for other diagnostic information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 1305. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: Redundancy lost
Cause: A virtual disk or an enclosure has lost data redundancy. In the case of a virtual disk, one or more array disks included in the virtual disk have failed. Due to the failed array disk or disks, the virtual disk is no longer maintaining redundant (mirrored or parity) data. The failure of an additional array disk will result in lost data. In the case of an enclosure, more than one enclosure component has failed. For example, the enclosure may have suffered the loss of all fans or all power supplies.
Action: Identify and replace the failed components. To identify the failed component, select the Storage object and click the Health subtab. The controller status displayed on the Health subtab indicates whether a controller has a failed or degraded component. Click the controller that displays a Warning or Failed status. This action displays the controller Health subtab which displays the status of the individual controller components. Continue clicking the components with a Warning or Failed status until you identify the failed component. See Storage Health for more information. See the enclosure documentation for information on replacing enclosure components and for other diagnostic information.
Severity: Warning/Non-critical . See Alert Severity Levels for more information. The SNMP trap for this alert has a severity of Critical.
SNMP Trap Number: 1306. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: Redundancy normal
Cause: Data redundancy has been restored to a virtual disk or an enclosure that previously suffered a loss of redundancy.
Action: This alert is provided for informational purposes.
Severity: Ok/Normal . See Alert Severity Levels for more information.
SNMP Trap Number: 1304. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: SCSI sense sector reassign
Cause: A sector of the disk is corrupted and data cannot be maintained on this portion of the disk.
Action: If the disk is part of a non-redundant virtual disk, then replace the disk. Any data residing on the corrupt portion of the disk may be lost and you may need to restore from backup. If the disk is part of a redundant virtual disk, then any data residing on the corrupt portion of the disk will be reallocated elsewhere in the virtual disk.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 903. See SNMP Support for Storage Management Alerts for more information.
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Background Initialization started
Cause: Background initialization of a virtual disk has started. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 683
Description: Background Initialization cancelled
Cause: Background initialization of a virtual disk has been cancelled. A user or the firmware may have stopped background initialization.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 684
Description: Background Initialization failed
Cause: Background initialization of a virtual disk has failed.
Action: None.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 1204
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 685
Description: Background Initialization Completed
Cause: Background initialization of a virtual disk has completed. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 686
Description: Firmware version mismatch
Cause: The firmware on the controller is not a supported version.
Action: Install a supported version of the firmware. If you do not have a supported version of the firmware available, it can be downloaded from the Dell support site at support.dell.com.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 753
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Driver version mismatch
Cause: The controller driver is not a supported version.
Action: Install a supported version of the driver. If you do not have a supported driver version available, it can be downloaded from the Dell support site at support.dell.com.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 753
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Array Manager is installed on the system
Cause: Storage Management has been installed on a system that has an Array Manager installation.
Action: Installing Storage Management and Array Manager on the same system is not a supported configuration. Uninstall either Storage Management or Array Manager.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 103
SNMP Trap Variables: The SNMP trap variables for this alert are messageIDEvent and descriptionEvent. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Virtual disk initialization
Cause: Virtual disk initialization is in progress. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Communication timeout
Cause: The controller is unable to communicate with an enclosure. There are several reasons why communcation may be lost. For example, there may be a bad or loose cable. An unusual amount of I/O may also interrupt communication with the enclosure. In addition, communication loss may be caused by software, hardware, or firmware problems, bad or failed power supplies, and enclosure shutdown.
Action: Check for problems with the cables. See the Cables attached correctly section for more information on checking the cables. You should also check to see if the enclosure has degraded or failed components. To do so, select the enclosure object in the tree view and click the Health subtab. The Health subtab displays the status of the enclosure components. Verify that the controller has supported driver and firmware versions installed and that the enclosure management modules (EMMs) are each running the same version of supported firmware.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 853
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 688, 610, 611
Description: Enclosure alarm enabled
Cause: A user had enabled the enclosure alarm. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 851
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 676
Description: Enclosure alarm disabled
Cause: A user has disabled the enclosure alarm.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 851
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 677
Description: Dead disk segments restored
Cause: Disk space that was formerly "dead" or inaccessible to a redundant virtual disk has been restored. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: Array disk dead segments recovered
Cause: Portions of the array disk that were formerly inaccessible have been recovered. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: Controller rebuild rate has changed
Cause: A user has changed the controller rebuild rate. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 751
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 680
Description: Controller alarm enabled
Cause: A user has enabled the controller alarm. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 751
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 678
Description: Controller alarm disabled
Cause: A user has enabled the controller alarm. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 751
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 679
Description: Controller battery low.
Cause: The controller battery charge is low.
Action: Recondition the battery. See RAID Controller Batteries and Battery Tasks: Recondition Battery for more information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 1153
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 580
Description: Bad block replacement error
Cause: A portion of an array disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Action: See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 753
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 691
Description: Bad block sense error
Cause: A portion of an array disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Action: See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 753
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 691
Description: Bad block medium error
Cause: A portion of an array disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Action: See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 753
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 691
Description: Bad block extended sense error
Cause: A portion of an array disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Action: See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 753
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 691
Description: Bad block extended medium error
Cause: A portion of an array disk is damaged. See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Action: See Receive a "Bad Block" Alert with "Replacement," "Sense," or "Medium" Error for more information.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 753
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 691
Description: Asset tag changed.
Cause: A user has changed the enclosure asset tag. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 851
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Asset name changed.
Cause: A user has changed the enclosure asset name. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 851
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Service tag changed.
Cause: An enclosure service tag was changed. In most circumstances, this service tag should only be changed by Dell support.
Action: Ensure that the service tag was changed under authorized circumstances.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 851
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Maximum temperature probe warning threshold value changed
Cause: A user has changed the value for the maximum temperature probe warning threshold. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1051
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Minimum temperature probe warning threshold value changed
Cause: A user has changed the value for the minimum temperature probe warning threshold. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1051
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Controller alarm has been tested
Cause: The controller alarm test has run successfully. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 751
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Array disk online.
Cause: An offline array disk has been made online. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None
Description: Virtual disk renamed
Cause: A user has renamed a virtual disk. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 1201
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 608
Description: Dedicated hot spare assigned
Cause: A user has assigned an array disk as a dedicated hot spare to a virtual disk. See Protecting Your Virtual Disk with a Hot Spare for more information. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 574
Description: Dedicated hot spare unassigned
Cause: A user has unassigned an array disk as a dedicated hot spare to a virtual disk. See Protecting Your Virtual Disk with a Hot Spare for more information. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 901
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 575
Description: Communication regained
Cause: Communication with an enclosure has been restored. This alert is provided for informational purposes.
Action: None.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 851
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: Rebuild completed with errors
Cause: See A Rebuild Completes with Errors for more information.
Action: See A Rebuild Completes with Errors for more information.
Severity: Critical/Failure/Error. See Alert Severity Levels for more information.
SNMP Trap Number: 904
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: 690
Description: See readme.txt for a list of validated controller driver versions.
Cause: Storage Management is unable to determine whether the system has the minimum required versions of the RAID controller drivers.
Action: This alert is generated for informational purposes. See the Readme file for driver and firmware requirements. In particular, if Storage Management experiences performance problems, you should verify that you have the minimum supported versions of the drivers and firmware installed.
Severity: Ok/Normal. See Alert Severity Levels for more information.
SNMP Trap Number: 101
SNMP Trap Variables: The SNMP trap variables for this alert are messageIDEvent and descriptionEvent. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: The RAID controller firmware and driver validation was not performed. The configuration file cannot be opened.
Cause: Storage Management is unable to determine whether the system has the minimum required versions of the RAID controller firmware and drivers. This situation may occur for a variety of reasons. For example, the install directory path to the configuration file may not be correct. The configuration file may also have been removed or renamed.
Action: Reinstall Storage Management.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 753
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: The RAID controller firmware and driver validation was not performed. The configuration file is out of date or corrupted.
Cause: Storage Management is unable to determine whether the system has the minimum required versions of the RAID controller firmware and drivers. This situation has occurred because a configuration file is unreadable or missing data. The configuration file may be corrupted.
Action: Reinstall Storage Management.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 753
SNMP Trap Variables: The SNMP trap for this alert uses all of the SNMP trap variables. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: The current kernel version and the non-RAID SCSI driver version are older than the minimum required levels. See readme.txt for a list of validated kernel and driver versions.
Cause: The version of the kernel and the driver do not meet the minimum requirements. Storage Management may not be able to display the storage or perform storage management functions until you have updated the system to meet the minimum requirements.
Action: See the Readme file for kernel and driver requirements. Update the system to meet the minimum requirements and then reinstall Storage Management.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 103
SNMP Trap Variables: The SNMP trap variables for this alert are messageIDEvent and descriptionEvent. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Description: The non-RAID SCSI driver version is older than the minimum required level. See readme.txt for the validated driver version.
Cause: The version of the driver does not meet the minimum requirements. Storage Management may not be able to display the storage or perform storage management functions until you have updated the system to meet the minimum requirements.
Action: See the Readme file for the driver requirements. Update the system to meet the minimum requirements and then reinstall Storage Management.
Severity: Warning/Non-critical. See Alert Severity Levels for more information.
SNMP Trap Number: 103
SNMP Trap Variables: The SNMP trap variables for this alert are messageIDEvent and descriptionEvent. See SNMP Trap Variables for more information.
Corresponding Array Manager Event Number: None.
Go to Table of Contents for Storage Management Online Help
