Contents Page

Preferences→ General Settings→ Web Server→ Properties Function

Description

The Preferences→ General Settings→ Web Server→ Properties function enables you to set preferences for the HTTPS server used by the Dell OpenManage™ systems management software solution.

Prerequisites

None.

Operations and Inputs

1. Specify the following server parameters in the attribute/value table:
   
   
   • Session Timeout (Seconds) — Select Disable or Enable; if you select Enable, select a timeout interval from the numeric scroll box to the right of this item.
     
     
   • HTTPS Port — Select Use Default or Use. If you select Use Default, the Dell OpenManage systems management software solution uses the default HTTPS IP port, 1311. If you select Use, specify the IP port you want the Dell OpenManage systems management software solution to use in the text box to the right of this item.
     
     
   • IP Address to Bind to — Select All or Specific; if you select Specific, specify the IP address in the text box to the right of this item.
     
     
   • SMTP Server Name (or IP Address) — Specify the SMTP server that the Dell OpenManage systems management software solution uses to send e-mail.
     
     
   • DNS Suffix for SMTP Server — Specify the DNS suffix (also called the domain) of the SMTP server. This suffix is usually the group of dot-separated strings after the "@" symbol in an e-mail address.
     
     
   • Command Log Size — Specify the maximum size of the command log in megabytes (MB) using the scroll box to the right of this item. When the command log reaches this limit, entries begin to be deleted, oldest entries first.
     
     
   • Support Link — Enter the default https address to which the Support button on the global navigation bar connects.
     
     
2.  Click Apply Changes.

Expected Results

None.

Possible Errors

Subsequent Operations

You can return to Remote Install by clicking Return to Remote Install Vx.y Build z on the global navigation bar, where x, y, and z are numbers that indicate version number and build number for your product.

Contents Page