|
|
NOTE: Your computer must have wireless adapter mounting slots in order to mount the Dell TrueMobile 1300 wireless adapter on your computer. |
Align the grooves on the base of the adapter with the rails on the clip, and
firmly slide the adapter forward until you hear a snap and the clip is fully connected to the adapter.
|
|
NOTE: Remove the cable cover on the back of your computer before mounting the adapter on the computer. For instructions on removing the cable cover, see the User’s Guide that came with your computer. |
Insert the clip, with the adapter attached, into the adapter slot on top of the computer, and slide it forward until the clip snaps into place.
|
|
NOTE: When mounting the adapter on the computer, use the 1-foot cable to connect the adapter to the computer. |
Slide the adapter back and out of the adapter slot.
Turn the adapter over, slightly lift up the tab on the clip with a screwdriver, and then slide the adapter away from the clip.
