The Dell TrueMobile 2300 Wireless Broadband Router has seven Light Emitting
Diodes (LEDs), or link lights, on its front side. The following table defines the behavior for each
LED:
LED
Represents
Activity
Power
Power
The Power LED will light up when the device is powered on. It will
blink when the device is reset.
Wireless
Wireless LAN
Steady on when there is at least one wireless link connecting to the
unit.
Internet
DSL or cable
modem
Steady green light indicates the connection is active, blinks with data activity.
Steady amber light indicates data collision.
LAN 1
LAN 2
LAN 3
LAN 4
Local Area Network
Steady green light indicates the connection is active and transfer rate
is at 100Mbps.
Steady greenish amber light indicates the connection is active and
transfer rate is at 10Mbps.
Accept locking devices for protecting the device from theft.
Reset
Use an object, such as a stretched paper clip, to press the button for at least
3 seconds.
Power LED will be off for a short time and then light up again.
You can release the button now to to reset the device to its factory-default
settings.
Internet
Accept an RJ-45 connector for network cabling.
LAN 1
LAN 2
LAN 3
LAN 4
Accept an RJ-45 connectors for connecting up to 4 PCs to the gateway's
4-port switch.
Power
Connect the power adapter to this Power port, and then plug the other end of
the power cable into a power outlet.
