Manuals

Back to Contents Page

Bridge Extension Commands:
Dell PowerConnect Switch User's Guide

bridge-ext gvrp

show bridge-ext

This section describes how to enable GVRP, as well as how to display the default configuration settings for the Bridge Extension MIB.

bridge-ext gvrp

Use this command to enable GVRP. Use the no form to disable it.

Syntax

bridge-ext gvrp
no bridge-ext gvrp

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

GVRP defines a way for switches to exchange VLAN information in order to register VLAN members on ports across the network. This function should be enabled to permit automatic VLAN registration, and to support VLANs which extend beyond the local switch.

Example

Console(config)#bridge-ext gvrp Console(config)#

show bridge-ext

Use this command to show the configuration for bridge extension commands.

Default Setting

None

Command Mode

Privileged Exec

Example

Console#show bridge-ext  Max support vlan numbers: 255  Max support vlan ID: 4094  Extended multicast filtering services: No  Static entry individual port: Yes  VLAN learning: IVL  Configurable PVID tagging: Yes  Local VLAN capable: No  Traffic classes: Enabled  Global GVRP status: Enabled  GMRP: Disabled Console#

Please read all restrictions and disclaimers.

 Back to Contents Page