Supports both 100BASE-TX and 10BASE-T network types
Full-Duplex supported for up to 200Mbps data throughput
Complies with PCI-Bus standard version 2.1, 2.2
Complies with IEEE 802.3u and IEEE 802.3 standards
Shielded RJ-45 connector for twisted-pair cable
Full ACPI function support
Plug & Play auto-configuration by PCI BIOS
Speed and Link / Activity Diagnostic LEDs
Meets FCC B and CE Mark emission standards
Auto Negotiation function automatically sets line speed
This single port Fast Ethernet Adapter is
capable of handling both 100BASE-TX and 10BASE-T network data. One (1)
RJ-45 female socket is provided for twisted pair cable attachment. The
socket has been shielded for improved EMI protection. Two (2) LEDs are
located above the RJ-45 connector (See Table 1. LED Descriptions)
Table 1. LED Descriptions
Name
Color
Function
Speed
Green
Lit: 100 Mbps speed
Link/Act
Green
Lit: Link Blinking:
activity
NOTE: The "Speed" LED will be
solid green anytime the system is powered "ON". This does not matter
if the cable is plugged or unplugged. This LED will be turned "OFF" if
the network speed is switched to operate in 10Mbps mode.
