Analog RGB, 0.7 Volts +/-5%, positive polarity
at 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, positive polarity
at 50 ohm input impedance
Synchronization input signals
Separate horizontal and vertical synchronizations,
polarity-free TTL level, Composite
AC input voltage / frequency / current
90 to 264 VAC / 50 or 60 Hz + 2Hz /
Adapter 16V 3.95A output
If you have VESA's DPMS compliance display card or software installed in your
PC, the LCD TV can automatically reduce its power consumption when not in use.
This is referred to as 'Power Save Mode'*. If input from keyboard, mouse or
other input devices is detected by the computer, the LCD TV will automatically
"wake up". The following table shows the power consumption and signaling of
this automatic power saving feature:
PC display power management mode
Power Management Definition
VESA Modes
Video
H-sync
V-sync
Power Used
LED color
ON
Active
Yes
Yes
50 W (typical)
Green
OFF
Blanked
No
No
< 3 W
Amber
NOTE: In Power Saving Mode, Press Any Key on Keyboard or Move
Mouse.
Activate the computer and 'wake up' the LCD TV to gain access to
the OSD.
TV and Video Power Management Modes
Power management Definition
Display
Video
Power State
Power Used
LED color
ON
Active
Always On
63 W (typical)
Green
Stand by
Blanked
Off after 30minutes of no signal
< 3W
Amber
Power switch off
Active/Blanked
Off
< 1W
OFF
This monitor is ENERGY STAR®-compliant
as well as TCO '99 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting
the main cable from the monitor.
ENERGY STAR® is a U.S.
registered mark. As an ENERGY STAR®
Partner, DELL has determined that this product meets the ENERGY
STAR® guidelines for energy efficiency.
NOTE: This LCD TV automatically returns to normal operation when horizontal and vertical sync return, which occurs when you move the computer's mouse or press a key on the keyboard.
You can install the LCD TV in any Plug and Play-compatible system. The LCD TV
automatically provides the computer system with its Extended Display Identification
Data (EDID) using Display Data Channel (DDC) protocols so the system can configure
itself and optimize the LCD TV settings.