|
Specifications: Dell E771a Color Monitor User's Guide
Back to Contents Page
Specifications: Dell™ E771a Color Monitor User's Guide
General • CRT(17") •
Resolution • Preset Display Modes •
Electrical • Physical Characteristics •
Environmental
• Power Management Modes •
Pin
Assignments • Plug and Play Capability
|
|
|
| Model number |
E771a |
|
|
|
|
| Screen
dimensions |
|
| Preset Image
Size |
Diagonal15.2
inches (386 mm) |
| (This is the
Dell recommended viewing size) |
Horizontal 12.2 inches
(310 mm) |
|
Vertical
9.05 inches (230 mm) |
| Viewable Image
Size (VIS) |
Diagonal 15.98 inches
(406.0 mm) |
| (This is the
maximum viewable image) |
Horizontal
12.78 inches (324.5 mm) |
|
Vertical
9.61 inches (244 mm) |
| Phosphor Diagonal Pitch |
0.27 mm |
| Deflection angle |
90° |
| Phosphor type |
P22 medium / short |
| Faceplate coating |
antistatic, antiglare,
antireflection |
|
|
|
|
| Horizontal scan range |
31 kHz to 70 kHz (automatic) |
| Vertical scan range |
50 Hz to 160 Hz (automatic) |
| Optimal preset resolution |
1024 x 768 at 75 Hz |
| Highest preset resolution |
1024 x 768 at 85
Hz |
| Highest addressable
resolution* |
1280 x 1024 at
60 Hz |
| * Addressable
means the monitor will sync up to this mode. However, Dell does not guarantee the
image will be sized and centered correctly. Dell
guarantees image size and centering for all preset modes listed in the following table. |
| Display Mode |
Horizontal
Frequency (kHz) |
Vertical
Frequency (Hz) |
Pixel Clock
(MHz) |
Sync Polarity
(Horizontal /
Vertical) |
| IBM®, VGA1, 720 x 400 |
31.5 |
70.1 |
28.3 |
-/+ |
| IBM, VGA3, 640 x 480 |
31.5 |
59.9 |
25.2 |
-/- |
| VESA®, 640 x 480 |
37.5 |
75.0 |
31.5 |
-/- |
| VESA, 640 x 480 |
43.3 |
85.0 |
36.0 |
-/- |
| VESA, 800 x 600 |
46.9 |
75.0 |
49.5 |
+/+ |
| VESA, 800 x 600 |
53.7 |
85.1 |
56.3 |
+/+ |
| VESA, 1024 x 768 |
60.0 |
75.0 |
78.8 |
+/+ |
| VESA, 1024 x 768 |
68.7 |
85.0 |
94.5 |
+/+ |
|
|
|
|
|
| Video input signals |
analog, 0.7 Vpp, positive at
75 ohm |
| Synchronization input signals |
separate horizontal and
vertical;
TTL level, positive or negative |
| AC input voltage / frequency /
current |
100 ~ 120 and
200~240 VAC/ 47 ~ 63 Hz/
1.0 A (RMS) at 120 VAC and
0.65 A (RMS) at 220 VAC |
| Inrush current at 120 V |
40 A
max. |
| Inrush current at 240 V |
60 A max. |
|
|
|
|
| Connector type |
15-pin D-subminiature |
| Signal cable type |
attached to monitor |
| Dimensions:(with
stand) |
|
Height
|
16.61
inches (422mm ) |
Width
|
15.98 inches (
406 mm ) |
Depth
|
16.24 inches
(412.5 mm ) |
| Weight (monitor only) |
33.7 lb (15.3
kg ) |
| Weight (with packaging) |
38.5 lb (17.5
kg ) |
|
|
|
|
| Temperature: |
|
Operating
|
41° to 104°F (5° to 40°C ) |
Nonoperating
|
-4° to 140°F
(-20° to
60°C ) |
| Humidity: |
|
Operating
|
10% to 80% (noncondensing) |
Nonoperating
|
5% to 95% (noncondensing) |
| Altitude: |
|
Operating
|
3,048 m (10,000 ft) |
Nonoperating
|
12,192 m (40,000 ft) |
| Thermal dissipation |
341 BTU/hour
(maximum)
273 BTU/hour (typical) |
If you have VESA's DPMS compliant display card or software
installed in your PC, the monitor can automatically reduce its power consumption when not
in use. If input from keyboard, mouse or other input devices is detected, the monitor will
automatically "wake up". The following table shows the power consumption and
signaling of this automatic power saving feature:
Power Management Definition |
VESA's Mode |
Video |
H-sync |
V-sync |
Power
Used |
LED
color |
ON |
Active |
Yes |
Yes |
|
Green |
Stand-by |
Blanked |
No |
Yes |
<=5W |
Amber blinking |
Suspend |
Blanked |
Yes |
No |
<=5W |
Amber blinking |
Active-OFF* |
Blanked |
No |
No |
<=5W |
Amber blinking |
This monitor is ENERGY STAR®-compliant . 
* Zero power consumption in OFF mode can
only be achieved by disconnecting the mains cable from the monitor.
ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR®
Partner, DELL has determined that this product meets the ENERGY STAR® guidelines for
energy efficiency.
Pin Number |
15-Pin Side of the Signal Cable |
| 1 |
Video-Red |
| 2 |
Video-Green |
| 3 |
Video-Blue |
| 4 |
GND |
| 5 |
Self-test |
| 6 |
GND-R |
| 7 |
GND-G |
| 8 |
GND-B |
| 9 |
No
pin present |
| 10 |
GND-sync |
| 11 |
GND |
| 12 |
DDC data |
| 13 |
H-sync |
| 14 |
V-sync |
| 15 |
DDC clock |
You can install the monitor in any Plug and Play-compatible system.
The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can
configure itself and optimize the monitor settings. If desired, the user can select
different settings, but in most cases monitor installation is automatic.
Back to Contents Page
|
