Manuals

Spare Parts Policy •  Regulatory Listing

Energy Efficiency

The proper operation of the function requires a computer with VESA® DPMS power management capabilities. When used with a computer equipped with VESA DPMS, the monitor is ENERGY STAR®-compliant. As an ENERGY STAR® Partner, Dell Computer Corporation has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Federal Communications Commission (FCC) Notice (U.S. Only)

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received including interference that may cause undesired operation.

Instructions to Users: This equipment complies with the requirements of FCC (Federal Communication Commission) equipment provided that following conditions are met.

1. Power cable: Shielded power cable must be used.
2. Video inputs: The input signal amplitude must not exceed the specified level.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Declaration of Conformity
According to 47 CFR, Part 15 of the FCC Rules
* For the following named product :
COLOR   MONITOR
(Category Name)
E771a / DELL	7377xe
(Model No / Brand Name)	(Basic Model)
* Manufactured at :
1. Acer Technology Sdn. Bhd   2686, Jalan Todak, Seberang Jaya 13700 Prai, Penang Malaysia
We hereby declare that this device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
* FCC Rules :
Tested to comply with FCC part 15, class B
* Test site at :
Compliance Engineering Services, Sunnyvale, CA, USA
* Responsible Party for Product Compliance :
Acer Communications & Multimedia Inc. 157, Shan-Ying Road, Gueishan, Taoyuan 333 Telephone 886-3-3598800 Fax 886-3-3599000
* Manufacturer Information :
Acer Communications & Multimedia Inc. 157, Shan-Ying Road, Gueishan, Taoyuan 333 2000-6-12		Ray Huang / Products Regulatory Manager
(place and date of issue)		(name and signature of authorized person)

EU Declaration of Conformity (LVD, EMC)
For the following product:
COLOR MONITOR
(category name)
E771a
(model name)
Manufactured at :
1. Acer Technology Sdn. Bhd   2686, Jalan Todak, Seberang Jaya 13700 Prai, Penang Malaysia
We hereby declare, that all major safety requirements, concerning to CE-Mark Directive (93/68/EEC) and Low Voltage Directive (73/23/EEC), Electromagnetic Compatibility Directives (89/336/EEC, 92/31/EEC) are fulfilled, as laid out in the guidelines set down by the member states of the EEC Commission. This declaration is valid for all samples that are part of this declaration, which are manufactured according to the production charts appendix. The standards relevant for the evaluation of electrical safety & EMC requirements are as follows :
EN 55022:1998 EN 61000-3-2:1995+A12/1996 +A13/1997+A1/1998+A2/1998 +A14/2000 EN 61000-3-3:1995   EN 60950 EN 55024:1998 EN 61000-4-2/1995 EN 61000-4-3/1995 EN 61000-4-4/1995 EN 61000-4-5/1995 EN 61000-4-6/1996 EN 61000-4-8/1993 EN 61000-4-11/1994
1. Certificate of conformity / Test report issued by :
LVD / TUV Rheinland EMC / Tokin
2. Technical documentation kept at :
Acer Communications & Multimedia Inc.
which will be made available upon request. (Manufacturer)
Acer Communications & Multimedia Inc. 157, Shan-Ying Road, Gueishan, Taoyuan 333 2001-4-17	Ray Huang / Products Regulatory Manager
(place and date of issue)	(name and signature of authorized person)
(Representative in the EU)
Supplier Name Supplier Name Acer Communications & Multimedia Inc. Europe B.V. Ekkersrijt 4130 5692 DC Son. The Netherlands 2001-4-17	Conway Lee /  Managing Director
(place and date of issue)	(name and signature of authorized person)

Canadian Regulatory Information (Canada Only)

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by Dell Computer Corporation could void your authority to operate this equipment.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

EN 55022 Compliance (Czech Republic Only)

VCCI Class 2 Notice (Japan Only)

This equipment complies with the limits for a Class 2 digital device (devices used in or adjacent to a residential environment) and conforms to the standards for information technology equipment that are set by the Voluntary Control Council for Interference for preventing radio frequency interference in residential areas.

Class B ITE

MIC Notice (South Korea Only)

B CLASS Device  

Please note that this device has been approved for nonbusiness purposes and may be used in any environment, including residential areas.

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source.

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251.

NOM Information (Mexico Only)

The following information is provided on the device(s) described in this document in compliance with the requirements of the official Mexican standards (NOM)

Información para NOM (únicamente para México)

La información siguiente se proporciona en el dispositivo o en los dispositivos descritos en este documento, en cumplimiento con los requisitos de la Norma Oficial Mexicana (NOM):

BSMI Notice (Taiwan Only)

Ergonomics Notice (Germany Only)

Under the requirements of German ergonomics standard EK1/59-98, EK1/60-98, graphics or characters:

1. Blue graphics or characters in dark background are not recommended. (This combination may increase eye fatigue due to poor visibility caused by low contrast.)
2. Graphics controller and monitor are recommended to be used in the following conditions:
   • Vertical frequency : 70 Hz or higher.
   • Display mode : Dark characters in bright background.

Ergonomie Hinweis (nur Deutschland)

Um den Anforderungen der deutschen Ergonomie-Norm  EK1/59-98, EK1/60-98 zu antsprechen.

1. Wird empfahlen, die Grunfarbe Blau nicht auf dunklem Hintergrund zu verwenden (schiechte Erkennbarkeit. Augenbelastung bei zu geringem Zeicheenkontrast).
2. Wird folgende Einstellung des Grafik-Controllers und Monitors empfohlen.
   • Vertikalfrequenz : 70 Hz oder hoher.
   • Ohne Zellensprung.

Spare Parts Policy

Dell commits to retaining stocks of spare parts (or reasonable alternatives) for a period of five years from the termination of production of the Dell system component–for example, the base system, the keyboard, or the monitor.

Back to Contents Page