* Addressable means the monitor will sync up to this
mode. However, Dell does not guarantee the image will be sized and
centered correctly.
Dell guarantees image size and centering for all preset modes
listed in the following table.
Preset Display Modes
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(Horizontal / Vertical)
IBM®, VGA2,
720 x 400
31.5
70.1
28.3
-/+
IBM, VGA3, 640 x 480
31.5
59.9
25.2
-/-
VESA, 640 x 480
43.3
85.0
36.0
-/-
VESA, 800 x 600
46.9
75.0
49.5
+/+
VESA, 800 x 600
53.7
85.1
56.3
+/+
VESA, 1024 x 768
60.0
75.0
78.8
+/+
VESA, 1024 x 768
68.7
85.0
94.5
+/+
Electrical
Video input signals
analog, 0.7 Vpp, positive at 75 ohm
Synchronization input signals
separate horizontal
and vertical; TTL level, positive or negative
If you have VESA's
DPMS compliance display card or software installed in your PC,
the monitor can automatically reduce its power consumption when
not in use. If input from keyboard, mouse or other input devices
is detected, the monitor will automatically "wake up".
The following table shows the power consumption and signaling of
this automatic power saving feature:
Power
Management Definition
VESA's Mode
Video
H-sync
V-sync
Power Used
Power Saving (%)
LED color
ON
Active
Active
Active
maximum 75W
typical 70W
0 %
Green
Suspend
Blanked
Active
Inactive
<5W
93%
Amber
Active-OFF*
Blanked
Inactive
Inactive
<5W
93%
Amber
Switched-OFF
Inactive
Inactive
Inactive
<1W
98.7%
None
This monitor is ENERGY STAR®
compliant.
* Zero power consumption in OFF
mode can only be achieved by disconnecting the mains cable from the monitor.
ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR®
Partner, DELL has determined that this product meets the ENERGY STAR® guidelines
for energy efficiency.
Pin
assignment
The 15-pin D-sub
connector (male) of the signal cable:
Pin
No.
Assignment
Pin
No.
Assignment
1
Video-Red
9
PC + 5V for DDC
2
Video-Green
10
Ground
3
Video-Blue
11
Ground
4
Ground
12
DDC data
5
Ground (Selftest)
13
H. Sync
6
Red video ground
14
V. Sync
7
Green video ground
15
DDC clock
8
Blue video ground
Plug and Play
Our adoption of the new VESA Plug and Play solution eliminates complicated
and time consuming setup. It allows you to install your monitor in a Plug and
Play compatible system without the usual hassles and confusion. Your PC system
can easily identify and configure itself for use with your monitor. This monitor
automatically tells the PC system it's Extended Display Identification (EDID)
data using Display Data Channel (DDC) protocols so the PC system can automatically
configure itself and optimize the monitor settings. If desired, the user can
select different settings, but in most cases, monitor installation is automatic.
