Safety Instructions: Dell
E151FP Color Display User's Guide
WARNING: Use of controls,
adjustments, or procedures other than those specified in this documentation may result in
exposure to shock, electrical hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your
computer display:
To help avoid damaging your computer, be sure that the voltage
selection switch on the power supply is set to match the alternating current (AC) power
available at your location:
115 volts (V)/60 hertz (Hz) in most of North and South America and
some Far Eastern countries such as Japan, South Korea, and Taiwan.
230 V/50 Hz in most of Europe, the Middle East, and the Far East
Also be sure that your display is electrically rated to
operate with the AC power available in your location.
Never insert anything metallic into the display openings. Doing so
may create the danger of electric shock.
To avoid electric shock, never touch the inside of the display. Only
a qualified technician should open the display's case.
Never use your display if the power cable has been damaged. Do not
allow anything to rest on the power cable, and keep the cable away from where people could
trip over it.
Be sure to hold the plug, not the cable, when disconnecting the
display from an electric socket.
Openings in the display cabinet are provided for ventilation. To
prevent overheating, these openings should not be blocked or covered. Also, avoid using
the display on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation
openings in the bottom of the cabinet. If you put the display in a bookcase or some other
enclosed space, be sure to provide adequate ventilation.
Put your display in a location with low humidity and a minimum of
dust. Avoid places like damp basement or dusty hallways.
Do not expose the display to rain or use it near water (in kitchens,
next to swimming pools, etc.). If the display accidentally gets wet, unplug it and contact
an authorized dealer immediately. You can clean the display with a damp cloth when
necessary, but be sure to unplug the display first.
Place the display on a solid surface and treat it carefully. The
screen is made of glass and can be damaged if dropped or sharply hit.
Locate your display near an easily accessible electric outlet.
If your display does not operate normally - in particular, if there
are any unusual sounds or smells coming from it - unplug it immediately and contact an
authorized dealer or service center.
Do not attempt to remove the back cover, as you will be exposed to a
shock hazard. The back cover should only be removed by qualified service personnel.
High temperatures can cause problems. Don't use your display
in
direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of
heat.
Unplug the display when it is going to be left unused for an extended
period of time.
Unplug your display from the electric outlet before any service.