Attaching the Cables: Dell™
E151FP Color Display User's Guide
Cable Connections On Back of Display and
Computer
1.Make sure that the computer and monitors power are both turned off .
Please follow the steps to install your LCD monitor.
a. Pull the base out.
b. Connect the power cord to your LCD monitor.
c. Connect the VGA-Cable, that is directly attached
to the monitor, to the VGA output of the graphics card on the computer.
2.Connect the power cord at the back of the monitor to an AC power socket.
Pleasemake sure, that the socket
is not blocked or covered, so you can disconnect the unit from AC supply if you
need to. Your monitor is equipped with an automatic power supply for a voltage
range from 100 to 240 Volt at a frequency of 50 to 60 Hz. Be sure that your
local power is within the supported range. If you are unsure, ask yourelectricity supplier.
If your display displays an image, installation is
complete. If it does not display an image, see Troubleshooting.
