Manuals

Tilt/Swivel Base: Dell M992 Color Monitor User's Guide

Tilt/Swivel Base: Dell™ M992 Color Monitor User's Guide

With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable viewing angle.

CAUTION: This monitor is shipped with the base attached.

Place the monitor upside-down on a stable, flat work surface.
Squeeze and pull up on the release latch on the swivel base.
Push the swivel base toward the back of the monitor and lift up to remove the base.

Turn off the monitor and unplug it from the electrical outlet.
Place the monitor upside-down on a padded, flat work surface.

A Tab slots (4)

Bottom of Monitor
Align the tabs on the swivel base with the corresponding slots on the bottom of the monitor.

NOTE: The base will align with the monitor slots in only one position.
Press the swivel base onto the monitor until the tabs are fully engaged in the slots, and then push the swivel base toward the front of the monitor until the release latch clicks into the locked position.

A Release latch

B Tabs (4)

C Tab slots (4)