Manuals

Specifications: Dell M992 Color Monitor User's Guide

Specifications: Dell™ M992 Color Monitor User's Guide

General • CRT • Resolution • Preset Display Modes • Electrical • Physical Characteristics • Environmental • Power Management Modes • Pin Assignments • Plug and Play Capability

CRT(19")

Screen dimensions

Preset Image Size
(This is the Dell recommended viewing image)

Diagonal 17.32 inches(440 mm)
Horizontal 13.86 ± 0.16 inches(352 ± 4 mm)
Vertical 10.39 ± 0.16 inches(264 ± 4 mm)

Viewable Image Size (VIS)
(This is the maximum viewable image)

Diagonal 18.00 inches(456.4mm) Max
Horizontal 14.37 inches(365 mm)
Vertical 10.79 inches(274 mm)

Dot Pitch

0.243 mm

Deflection angle

90°

Phosphor type

P22 (R,G,B, medium short persistence)

Faceplate coating

Anti-static/anti-glare non-diffusing, multi-layer coating, high gloss value (spin coating)

Resolution

Horizontal scan range

30 kHz to 96 kHz (automatic)

Vertical scan range

50 Hz to 160 Hz (automatic)

Optimal preset resolution

1280 x 1024 at 75 Hz

Highest preset resolution

1600 x 1200 at 75 Hz

Highest addressable resolution
Dell does not guarantee image performance on non-preset video modes.

1600 x 1200 at 75 Hz

Dell guarantees image size and centering for all preset modes listed in the following table.

Preset Display Modes

Display Mode	Horizontal Frequency (kHz)	Vertical Frequency (Hz)	Pixel Clock (MHz)	Sync Polarity (Horizontal / Vertical)
IBM^®, VGA2, 720 x 400	31.469	70.087	28.322	-/+
IBM, VGA3, 640 x 480	31.469	59.940	25.175	-/-
VESA, 640 x 480	43.269	85.080	36.000	-/-
VESA, 800 x 600	53.674	85.061	56.250	+/+
VESA, 1024 x 768	68.677	84.997	94.500	+/+
VESA, 1280 x 1024	79.976	75.000	135.00	+/+
VESA, 1280 x 1024	91.15	85.000	157.50	+/+
VESA, 1600 x 1200	93.750	75.000	202.50	+/+

Electrical

Video input signals

analog, 0.7 Vpp, positive at 75 ohm

Synchronization input signals

Separate horizontal and vertical;
TTL level, positive or negative

AC input voltage / frequency / current

90 to 264 VAC / 50 or 60 Hz ±3 Hz /
2.0 A (RMS) at 120 VAC and
1.0 A (RMS) at 220 VAC

Inrush current at 120 V

20 A

Inrush current at 220 V

35 A

Physical Characteristics

Connector type

15-pin D-subminiature

Signal cable type

attached to monitor

Dimensions:

Height (with base)

17.7 inch (450 mm)

Height (without base)

15.7 inch (400 mm)

Width

17.3 inch (440 mm)

Depth

18.3 inch (464 mm)

Weight (monitor only)

46.2 lb (21 kg)

Weight (with packaging)

53.4 lb (24.25 kg)

Environmental

Temperature:

Operating

0 ° to 40 °C (32 ° to 104 °F)

Non-operating

-20 ° to 60 °C (-4 ° to 140 °F)

Humidity:

Operating

20% to 80% (noncondensing)

Non-operating

5% to 95% (noncondensing)

Altitude:

Operating

3,000 m (10,000 ft)

Non-operating

15,000 m (50,000 ft)

Thermal dissipation

341 BTU/hour (maximum)
290 BTU/hour (typical)

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If input from keyboard, mouse or other input devices is detected by the computer, it will automatically "wake up" the monitor. The following table shows the power consumption and signaling of this automatic power saving feature:

Power Management Definition
VESA's Mode	Video	H-sync	V-sync	Power Used	Power Saving (%)	LED color
ON	Active	Yes	Yes	Max 120W Typical 110W	0 %	Green
Active-OFF *	Blanked	No	No	Less than 3W	95 %	Green blinking

This monitor is ENERGY STAR® compliant as well as TCO '99 and MPR II power management compatible.

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, DELL has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

Pin Assignments

Pin Number 15-Pin Side of the Signal Cable

1 Video-Red

2 Video-Green

3 Video-Blue

4 No connection (pin present)

5 DDC-return

6 GND-R

7 GND-G

8 GND-B

9 DDC + 5V

10 GND-sync/self-test

11 No connection (pin present)

12 DDC data

13 H-sync

14 V-sync

15 DDC clock

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different settings, but in most cases monitor installation is automatic.

Back to Contents Page