Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an on-screen display (OSD) shows their numeric values as they change.
* All menus automatically save you adjustments 3 seconds after you stop adjusting the setting.
1, 2
Brightness and Contrast ( - and + ) button
These buttons are direct access for the brightness and contrast and adjust (decrease/increase ranges) items in the OSD.
3
MENU button
This button is used with the OSD system to activate a highlighted function for adjustment.
Size(Horizontal):
the - / +
buttons change the horizontal size of the screen image.
Size(Vertical):
the - / +
buttons change the vertical size of the screen image.
Size(Zoom):
Simultaneously adjusts the width and height in order to "zoom in" or "out".
the -
button decreases the screen image.
the +
button enlarges the screen image.
Rotation:
the - / +
buttons adjust the rotation setting.
The - button will rotate the screen image counter-clockwise.
The + button will rotate the screen image clockwise.
Pincushion:
Pincushion straightens the left and right vertical edges of the display.
The - / +
buttons curve image inward/outward.
Pinbalance:
the - / +
buttons adjust how much the pincushion control proportionally affects the left/right side of the screen.
Trapezoid:
Trapezoid adjusts the width of the top and bottom of the screen.
The - / +
buttons widen bottom of screen or top of screen.
Parallel:
the - / +
buttons simultaneously adjust
the vertical straightness of both the left and right side of the screen.
Color temperature:
Color temperature is a measure of the 'warmth' of the image colors (red/green/blue).
The available range is between 5000 to 9300K. There are three available presets (9300K, 6500K (sRGB) and 5000K).
Select each one to see how each range suits your eye....
or utilize the 'User Preset' option to customize the color settings to your exact choice.
9300K Preset is selected to obtain a bluish tint.
5000K Preset is selected to obtain a redder tint.
User Preset: Use the plus and minus buttons to gradually increase or decrease the color temperature from 5000K to 9300K.
Language:
Use the language used in the menu.
You can choose one of 5 languages(English, Deutsch, Español, Français, Japanese).
Degauss:
Remove color impurities caused by magnetic fields. Do not use the Degauss feature more than once within a 30-mintue period.
Push
the +
button to execute the degauss function.
NOTE: The monitor may
buzz momentarily, the image colors may change and the image
will jiggle for a few seconds. These effects are normal.
H & V Moiré Adjust:
Corrects for an on-screen Video moiré pattern caused by interference between a well focused electron beam and the color phosphor dots on the front of the screen.
The
- / +
buttons adjust the amount of "beam wobble" to clear the moiré pattern.
OSD H Position:
Change the horizontal position where the OSD menu appears on your monitor.
OSD V Position:
Change the vertical position where the OSD menu appears on your monitor.
OSD Lock/Unlock:
Allows you to secure the current control settings so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time by using the same procedure.
Whenever you open the OSD and allow an adjustment window to remain on screen for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made. These changes are saved into a user area in the monitor. User areas are reserved according to the signal frequency of your computer. The monitor can save adjustments for up to eight user modes. It has eight preset modes, one for each signal frequency, as listed in Preset Display Modes.
If you have made no adjustments, the on-screen menu disappears after 15 seconds and the monitor does not save anything.
A warning message may appear on the screen indicating that the monitor is out of sync. This warning message will scroll through the screen.
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high or too low for the monitor to use. See Specifications for the Horizontal and Vertical scan ranges addressable by this monitor.
Sometimes, no warning message appears, but the screen is blank, which could also indicate that the monitor is not synchronizing with the computer.
The power indicator LED glows a steady green while you are actively using your computer system, or it blinks according to the table below. A blinking indicator LED indicates the monitor is using one of the reduced power modes supported by your computer system.
State
Normal Operation
Power-off Mode
Power Indicator
Green
Blinking Green
NOTE: Your monitor will automatically "wake up" if it detects any input from the keyboard, mouse or other input device.
