|
Specifications: Dell E771p Color Monitor User's Guide
Back to Contents Page
Specifications :
Dell™
E771p Color Monitor User's Guide
General • CRT • Resolution • Preset Display Modes
• Electrical • Physical Characteristics • Environmental • Power Management Modes • Pin Assignments
•
Plug & Play
General
CRT
|
Screen dimensions
|
17" (43.2 cm) flat & square (16.0" viewable image size)
|
| Preset
Display area: |
|
Horizontal
Vertical
|
300±4
mm (11.81±0.02 inches)
225±4 mm (8.86±0.02 inches)
|
|
Phosphor Dot pitch
|
0.27 mm
|
|
Deflection angle
|
90°
|
|
Phosphor type
|
P22, medium short persistence
|
|
Faceplate coating
|
Anti-glare, anti-static
|
Resolution
|
Horizontal scan range
|
30 - 70 kHz (automatic)
|
|
Vertical scan range
|
50 - 160 Hz (automatic)
|
|
Optimal preset resolution
|
1024 x 768 at 75 Hz
|
|
Highest preset resolution
|
1024 x 768 at 85 Hz
|
|
Highest addressable resolution*
|
1280 x 1024 at 60 Hz
|
|
* Addressable means the monitor will sync up to this
mode. However, Dell does not guarantee the image will be sized and
centered correctly.
Dell guarantees image size and centering for all preset modes
listed in the following table.
|
|
Preset Display Modes
| Display Mode |
Horizontal
Frequency
(kHz) |
Vertical
Frequency
(Hz) |
Pixel Clock
(MHz) |
Sync Polarity
(Horizontal / Vertical) |
| IBM®, VGA2,
720 x 400 |
31.5 |
70.1 |
28.3 |
-/+ |
| IBM, VGA3, 640 x 480 |
31.5 |
59.9 |
25.2 |
-/- |
| VESA®, 640
x 480 |
37.5 |
75.0 |
31.5 |
-/- |
| VESA, 640 x 480 |
43.3 |
85.0 |
36.0 |
-/- |
| VESA, 800 x 600 |
46.9 |
75.0 |
49.5 |
+/+ |
| VESA, 800 x 600 |
53.7 |
85.1 |
56.3 |
+/+ |
| VESA, 1024 x 768 |
60.0 |
75.0 |
78.8 |
+/+ |
| VESA, 1024 x 768 |
68.7 |
85.0 |
94.5 |
+/+ |
Electrical
|
Video input signals
|
analog, 0.7 Vpp, positive at 75 ohm
|
|
Synchronization input signals
|
separate horizontal
and vertical; TTL level, positive or negative
|
|
AC input voltage / frequency
|
100-240 VAC ± 10% (90 - 264VAC) / 60-50Hz (47-63Hz)
|
|
AC input current
|
1.5 A max.
|
|
Inrush current at 120V
Inrush current at 240 V
|
25 A
34 A
|
Physical Characteristics
|
Connector type
|
15- pin D-sub
|
|
Signal cable
|
attached to monitor
|
| Dimensions: |
|
Height
Width
Depth
|
409 mm (16.1 inches)
399 mm (15.7 inches)
410.4 mm (16.1 inches)
|
|
Weight (monitor only)
Weight (with packaging)
|
15.0 kg (33.0 lbs)
18.0 kg (39.6 lbs)
|
Environmental
| Temperature: |
|
Operating
Non-operating
|
5°
C to 40° C
-40° C to 60° C
|
| Humidity: |
|
Operating
Non-operating
|
10% to 80% (non-condensing)
5% to 90% (non-condensing)
|
| Altitude: |
|
Operating
Non-operating
|
0~3000
m (0~10,000 ft)
0~12,200 m (0~40,000 ft)
|
|
Thermal dissipation
|
273.0
BTU/hour (maximum)
255.9 BTU/hour (typical)
|
Power
Management Modes
If you have VESA's
DPMS compliance display card or software installed in your PC,
the monitor can automatically reduce its power consumption when
not in use. If input from keyboard, mouse or other input devices
is detected, the monitor will automatically "wake up".
The following table shows the power consumption and signaling of
this automatic power saving feature:
Power
Management Definition
|
| VESA's Mode |
Video |
H-sync |
V-sync |
Power Used |
Power Saving (%) |
LED color |
| ON |
Active |
Yes |
Yes |
maximum 80W
typical 75W
minimum 45W
|
0 % |
Green |
| Suspend |
Blanked |
Yes |
No |
1-5W
|
95% |
Amber |
| Active-OFF* |
Blanked |
No |
No |
1-5W
|
95% |
Amber |
| Switched-OFF |
|
|
|
<1W
|
|
|
This monitor is ENERGY STAR®
compliant. 
* Zero power consumption in OFF
mode can only be achieved by disconnecting the mains cable from the monitor.
ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR®
Partner, DELL has determined that this product meets the ENERGY STAR® guidelines
for energy efficiency.
Pin
assignment
The 15-pin D-sub
connector (male) of the signal cable:
|
Pin
No.
|
Assignment |
|
Pin
No.
|
Assignment |
|
1
|
Video-Red |
9 |
No Pin Present |
| 2 |
Video-Green |
10 |
Ground |
| 3 |
Video-Blue |
11 |
Ground |
| 4 |
Ground |
12 |
DDC data |
| 5 |
Ground (Selftest) |
13 |
H. Sync |
| 6 |
Red video ground |
14 |
V. Sync |
| 7 |
Green video ground |
15 |
DDC clock |
| 8 |
Blue video ground |
|
|
Plug and Play
Our adoption of the new VESA Plug and Play solution eliminates complicated
and time consuming setup. It allows you to install your monitor in a Plug and
Play compatible system without the usual hassles and confusion. Your PC system
can easily identify and configure itself for use with your monitor. This monitor
automatically tells the PC system it's Extended Display Identification (EDID)
data using Display Data Channel (DDC) protocols so the PC system can automatically
configure itself and optimize the monitor settings. If desired, the user can
select different settings, but in most cases, monitor installation is automatic.
Back to Contents Page
|
