Back to Contents Page

 

About Your Monitor

Dell™ 2407WFP Flat Panel Monitor

  Front View

  Back View

  Side View

  Bottom View

  Monitor Specifications

  Universal Serial Bus(USB) Interface

  Card Reader Specifications

  Plug and play capability

  Caring for Your Monitor

Front View

 

   

     

1

Input indicators
2

Input Source Select
3 PIP (Picture In Picture) / PBP (Picture By Picture) Select
4

OSD Menu / Select 
5

Down (-)
6

Up (+)

7

Power button (with power light indicator)

Back View

 

1

VESA mounting holes (100mm)

(Behind attached base plate)

Use to mount the monitor.

 
2 Connectors label Indicate the positions and types of connectors.
3 Barcode serial number label Refer to this label if you need to contact Dell for technical support.
4 Security lock slot Use a security lock with the slot to help secure your monitor.
5 Monitor Lock/Release Button Press to release the stand from the monitor.

6

 Regulatory rating label List the regulatory approvals.

7

 Dell Soundbar mounting brackets Attach the optional Dell Soundbar.

8

Lock down/release button

 

Push the monitor down, press the button to unlock the monitor, and then lift the monitor to the desired height.

9

 Cable management hole Help organize cables by placing them through the hole.

 

Side View

              

                                    Right side

                        

                                      Left side

1 Card reader: for details please refer to Card Reader Specifications
2 USB downstream ports

Bottom View

1 AC power cord connector
2 DC power connector for Dell™ Soundbar
3 DVI connector
4 VGA connector
5

Composite video connector
6

S-Video connector
7 Component video connectors 
8

USB upstream port
9

USB downstream ports

Monitor Specifications

General
Model number 2407WFP

Flat Panel
Screen type Active matrix - TFT LCD
Screen dimensions 24 inches (24-inch viewable image size)
Preset display area:
Horizontal
 518.4 mm (20.4 inches)
Vertical
 324.0 mm (12.7 inches)
Pixel pitch 0.270 mm
Viewing angle +/- 89° (vertical) typ, +/- 89° (horizontal) typ
Luminance output 450 cd/m ˛(typ)
Contrast ratio 1000:1 (typ)
Faceplate coating Antiglare with hard-coating 3H
Backlight 6 CCFLs U-type backlight  
Response Time 6 ms typical (Grey to Grey) / 16 ms typical (Black to White) 

Resolution
Horizontal scan range 30 kHz to 81 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz, exception 1920 x 1200 at 60 Hz only
Optimal preset resolution

1920 x 1200 at 60 Hz
Highest preset resolution

1920 x 1200 at 60 Hz

Video Supported Modes
Video display capabilities (DVI playback) 480p/576p/720p/1080p (Supports HDCP)
Video display capabilities (Composite playback) NTSC/PAL
Video display capabilities (S-Video playback) NTSC/PAL
Video display capabilities (Component playback) 480i/480p/576i/576p/720p/1080i

Preset Display Modes

Dell™ guarantees image size and centering for all preset modes listed in the following table.

Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)
VGA, 720 x 400 31.5 70.1 28.3 -/+
VGA, 640 x 480 31.5 59.9 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.3 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1600 x 1200 75.0 60.0 162.0 +/+
VESA, 1920 x 1200 74.0 60.0 154.0 +/-

Electrical
Video input signals

Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance 

Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input impedance

S-video, Y input 1 volt(p-p), C input 0.286 volt(p-p), 75 ohm input impedance

Composite, 1 volt(p-p), 75 ohm input impedance

Component: Y, Pb, Pr are all 0.5~1volt(p-p), 75 ohm input impedance  

Synchronization input signals

separate horizontal and vertical,
3.3V CMOS or 5V TTL level, positive or negative sync.

SOG (Sync on green)
AC input voltage / frequency / current 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)
Inrush current 120V: 40A (Max.)
240V: 80A (Max.)

Physical Characteristics
Signal cable type

D-sub: Detachable, Analog, 15pin, shipped attached to the monitor
DVI-D: Detachable, Digital, 24pin, shipped detached from the monitor
S-video: Not included with display 
Composite: Not included with display

Component: Not included with display  

Dimensions (with stand):
Height (fully extended in portrait mode)
 584.7 mm (23.0 inches)
Height (compressed/locked in landscape mode)
 387.9 mm (15.3 inches)
Width
 559.7 mm (22.0 inches)
Depth
 195.0 mm (  7.7 inches)
Weight 

Monitor (Stand and Head)

 8.3 Kg (18.3 lb)

Monitor Flat panel only (VESA Mode)

 6.5 Kg (14.3 lb)

Weight with packaging

 11.2 Kg (24.7 lb)

Environmental
Temperature:
Operating
 5° to 35°C (41° to 95°F)
Non-operating
 Storage: 0° to 60°C (32° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F)
Humidity:
Operating
 10% to 80% (non-condensing)
Non-operating
 Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90%(non-condensing)
Altitude:
Operating
 3,657.6 m (12,000 ft) max
Non-operating
 12,192 m (40,000 ft) max
Thermal dissipation 375.0 BTU/hour (maximum)
195.0 BTU/hour (typical)

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If activity from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving feature:

VESA Modes

Horizontal Sync

Vertical Sync

Video

Power Indicator

Power Consumption

Normal operation Active Active Active Green 110W (maximum)*
57W (normal)**
Active-off mode Inactive Inactive Blanked Amber Less than 2 W
Switch off
-
-
-
 Off Less than 1 W (at 230 V)

        * With Audio + USB
      ** Without Audio + USB
 
This monitor is ENERGY STAR®-compliant as well as TCO '99/ TCO '03 power management compatible.

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

 

 

Pin Assignments

VGA Connector


Pin Number
15-pin Side of the Connected Signal Cable
1 Video-Red  
2 Video-Green
3 Video-Blue
4 GND
5 Self-test
6 GND-R
7 GND-G
8 GND-B
9

Computer 5V/3.3V
10 GND-sync
11 GND
12 DDC data
13 H-sync
14 V-sync
15 DDC clock

 

DVI Connector  


Pin Number
24-pin Side of the Connected Signal Cable
1 TMDS RX2-
2 TMDS RX2+
3 TMDS Ground
4 Floating
5 Floating
6 DDC Clock
7 DDC Data
8 Floating
9 TMDS RX1-
10 TMDS RX1+
11 TMDS Ground
12 Floating
13 Floating
14

+5V / +3.3V power
15 Self test 
16 Hot Plug Detect
17 TMDS RX0-
18 TMDS RX0+
19 TMDS Ground
20 Floating
21 Floating
22 TMDS Ground
23 TMDS Clock+
24 TMDS Clock-

S-video Connector

      


Pin Number
5-pin Side of the Connected Signal Cable (Cable not included)
1 GND
2 GND
3 LUMA
4 CHROMA
5 GND

Composite Video Connector

Pin Number 1-pin Side of the Connected Signal Cable (cable not included)
1 LUMA COMPOSITE CHROMA

 

Component Video Connector
 

Pin Number 3-pin Side of the Connected Signal Cable (Cable not included)
1 Y (Luminance signal)
2 Pb (Color differential signal)
3 Pr (Color differential signal)

Universal Serial Bus (USB) Interface

This monitor supports High-Speed Certified USB 2.0 interface.

 
  Data Rate  Power Consumption
High speed 480 Mbps  2.5W (Max., each port)
Full speed 12 Mbps  2.5W (Max., each port)
Low speed 1.5 Mbps  2.5W (Max., each port)

 

USB Upstream Connector

 


Pin Number
4-pin Side of the connector
1 DMU
2 VCC
3 DPU
4 GND

USB Downstream Connector

 


Pin Number
4-Pin Side of the Signal Cable
1 VCC
2 DMD
3 DPD
4 GND

USB Ports

NOTE: USB 2.0 capability requires 2.0 capable computer 

NOTE: The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on,
attached peripherals may take a few seconds to resume normal functionality.

Card Reader Specifications  

Overview

Features

The Flash Memory Card Reader has the following features:


Slot Number
Flash memory cards type
1 Compact Flash type I/II Card (CF I/II) / CF form factor ATA hard drives to USB 2.0 bus

2

Smart Media Card (SMC)

Memory Stick Card (MS) / High Speed Memory Stick (HSMS) / Memory Stick Pro Card (MS PRO) / Memory Stick Duo (with Adapter)

Secure Digital Card (SD)/ Mini Secure Digital (with Adapter)/ TransFlash Card (with Adapter)

MultiMedia Card (MMC) / Reduced Size MultiMedia Card (with Adapter)

 

General

Connection type USB 2.0 High Speed Device (USB Full Speed Device compatible)
Supported OS Windows 2000 and XP

Performance

Transfer Speed Read: 480 Mb/s (max.)
 
  Write: 480 Mb/s (max.)

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different settings, but in most cases monitor installation is automatic.

Caring for Your Monitor

CAUTION: Read and follow the safety instructions before cleaning the monitor. 
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. 
 

Back to Contents Page