Safety Instructions: Dell™ 1703FP Flat Panel Color Monitor User's Guide
WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
To help avoid damaging your computer, be sure that the voltage selection switch on the power supply for the computer is set to match the alternating current (AC) power available at your location:
115 volts (V)/60 hertz (Hz) in most of North and
South America and some Far Eastern countries such as Japan, South Korea
(also 220 volts (V)/60 hertz (Hz)), and Taiwan.
230 volts (V)/50 hertz (Hz) in most of Europe, the Middle East, and the Far East.
Always be sure that your monitor is
electrically rated to operate with the AC power available in your location.
Note: This monitor does not need or have a voltage
selection switch for setting the AC voltage input.
It will automatically accept any AC input voltage according to the ranges defined in the
Electrical Specifications" section.
Never insert anything metallic into the monitor
openings. Doing so may create the danger of electric shock.
To avoid electric shock, never touch the inside of
the monitor. Only a qualified technician should open the monitor case.
Never use your monitor if the power cable has been
damaged. Do not allow anything to rest on the power cable. Keep the power
cable away from where people could trip over it.
Be sure to grasp the plug, not the cable, when
disconnecting the monitor from an electric socket.
Openings in the monitor cabinet are provided for
ventilation. To prevent overheating, these openings should not be blocked or
covered. Avoid using the monitor on a bed, sofa, rug, or other soft surface,
as doing so may block the ventilation openings in the bottom of the cabinet.
If you place the monitor in a bookcase or an enclosed space, be sure to
provide adequate ventilation and air flow.
Place your monitor in a location with low humidity
and minimum dust. Avoid places similar to a damp basement or dusty hallway.
Do not expose the monitor to rain or use it near
water (in kitchens, next to swimming pools, etc.). If the monitor accidentally
gets wet, unplug it and contact an authorized dealer immediately. You can
clean the monitor with a damp cloth when necessary, being sure to unplug the
monitor first.
Place the monitor on a solid surface and treat it
carefully. The screen is made of glass and can be damaged if dropped or hit
sharply.
Locate your monitor near an easily accessible electric outlet.
If your monitor does not operate normally - in
particular, if there are any unusual sounds or smells coming from it - unplug
it immediately and contact an authorized dealer or service center.
Do not attempt to remove the back cover, as you will be exposed to an electrical shock hazard. The back cover should only be removed by qualified service personnel.
High temperatures can cause problems. Don't use your
monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces,
and other sources of heat.
Unplug the monitor when it is going to be left unused
for an extended period of time.
Unplug your monitor from the electric outlet before any service is performed.
