Jumpers | Switches | Controls | Connectors and Sockets
There are no internal configuration jumpers in this system.
| Switch Number/Name | Setting | Description |
|---|---|---|
| (8) CPU CLK1 (7) CPU CLK0 |
Set according to the microprocessor's external speed. | |
| 8 OFF 7 ON |
The microprocessor's external speed is 50 MHz. | |
| 8 OFF 7 OFF |
The microprocessor's external speed is 60 MHz. | |
| 8 ON 7 ON |
The microprocessor's external speed is 66 MHz. | |
| (6) CPU FREQ | OFF | The microprocessor’s internal speed is 1.5 times its external speed. |
| ON | The microprocessor’s internal speed is 2.0 times its external speed. | |
| (5) SETUP | OFF (default) | Allows the user to enter the system setup program. |
| ON | Prevents the user from entering the system setup program. | |
| (4) CMOS | OFF (default) | System setup settings are retained at next system boot. |
| ON | System setup settings are reverted to the defaults at next system boot. |
|
| (3) Password | OFF (default) | Password feature is enabled |
| ON | Password feature is disabled | |
| (2) VRE | OFF | Processor voltage meets VR specification (3.3 V). Use this setting for 75- and 90-MHz systems. |
| ON | Processor voltage meets VRE specification (3.45 to 3.6 V). Use this setting for 100-MHz systems. | |
| (1) ISA Speed | OFF (default) | Reserved - do not change. |
Front Panel Layout
The power button is a push-button on/off switch.
The power indicator lights up when the system unit is on.
Pressing the reset button initiates a hardware reset. To avoid possible data or file structure corruption, use the reset button only when the system cannot be rebooted with the <CTRL-ALT-DEL> key combination, and close any open application programs or files if possible.
The hard-disk drive access indicator lights up when the hard-disk drive is being accessed.
The diskette-drive access indicators light up when the diskette-drive is being accessed.
Connector or Socket Description
+FAN Microprocessor cooling fan connector BANK1 (2) SIMM sockets BANK0 (2) BH7D1 Battery socket COM1 Serial port 1 interface connector COM2 Serial port 2 interface connector FLOPPY Diskette/tape drive interface connector (also J8G1) HD LED Hard-disk drive access indicator connector J1K1, J2K1, J2K2 ISA expansion-card connectors J3K1, J4K1, J5K1, PCI expansion-card connectors J5K2 J4C1 Cache-memory card connector J8M2 Power button connector J8N1 Mouse connector J9L1 Power input connector J9N1 Keyboard connector PARALLEL Parallel port connector PRI IDE Primary EIDE connector PWELED Power indicator connector RST Reset button connector SEC IDE Secondary EIDE connector SPKR Auxiliary speaker connector U3A1 Microprocessor socket U9H1, U9K1 Video-memory upgrade sockets VESA Video feature connector