|
 | | |
Removing the Cover: Dell Dimension XPS P133s, P166s, and P200s
Removing the Cover: Dell Dimension XPS P133s, P166s, and P200s
- Turn off the power and unplug the power cable.
- If you are working on a mini tower computer, lay the
computer on its right side with the chassis foot off the edge of the work surface. If
working on a desktop computer, lay it flat on the work surface.
- Loosen the cover-mounting thumbscrew that secures the cover to the back
of the computer.
 |
NOTE:
The thumbscrew is captive and should be retained in the cover when loosened. |
- As you face the front of the chassis, press the left
cover release latch with your left hand and grip the back lip of the cover near the latch
with your right hand.
- Pry the cover away from the back-left corner of the
computer with your right hand while pushing back with your left hand.
- Then press the right cover release latch with your right hand while using
your left hand to pry the cover lip away from the back-right corner of the computer.
- Slide the loosened cover back about half an inch, and then lift the cover
straight up to remove it from the computer.
|
|
|
