= pins 2-3 jumpered 
= pins 1-2 jumpered 
= pin 1 Jumper Locations
= pins 2-3 jumpered
= pins 1-2 jumpered
= pin 1
| 66/60 | 
(default) |
Reserved (do not change) |
| RCVR FLASH | 
(default) |
Reserved (do not change) |
| CMOS NRM/CLR | 
(default)
|
System setup settings are retained when
the system boots. System setup settings revert to their defaults when the system boots. (If the system setup settings become so corrupted that the system does not boot, put the jumper plug on pins 2-3 and boot the system. Reset the jumper plug on pins 1-2 before restoring the system setup settings.) |
| SETUP | 
(default)
|
Allows the user to enter the system
setup program. Prevents the user from entering the system setup program. |
| FLASH WP | 
(default) |
Reserved (do not change) |
| MONO/CLR | 
(default)
|
Color monitor Monochrome monitor |
| ENA/DIS PSWD | 
(default)
|
The password feature is enabled. The password feature is disabled. |
All controls are located on the front panel .
| Reset control | push button |
| Power control | push button |
| Power indicator | green LED |
| Hard-disk drive access indicator | green LED |
