DTA: Storage Devices
Storage Devices
The system unit provides:
 2 internal 1-inch-high (3.5-inch form factor) drive bays
2 external half-height (5.25-inch) drive bay
1 external half-height (3.5-inch) drive bay for a diskette drive
1 external half-height (3.5-inch) drive bay for a tape drive or EIDE diskette drive
The system board provides a primary EIDE hard-disk drive interface (PRIMARY IDE), a secondary EIDE device interface (SECONDARY IDE), and a diskette/tape controller (FLOPPY).The secondary EIDE interface is for use with EIDE devices such as tape drives or CD-ROMs.
Removing/Replacing...
a Drive in an External Bay
a Hard-Disk Drive
| 
