Manuals

Before You Begin
SCSI Hot-Docking Backplane Configurations
SCSI Hot-Docking Backplane Connectors

Before You Begin

System integration should be done by a qualified technical person.

WARNINGS:
The DC push-button power switch on the front panel does not turn off the system AC power.

Hazardous voltage, current, and energy levels are present inside the power supply. There are no user serviceable parts inside it; servicing should be done by technically qualified personnel.

Failure to disconnect telecommunications systems, networks, modems, and the power cord attached to the system before opening it can result in personal injury or equipment damage.

Hazardous electrical conditions may be present on power, telephone, and communication cables.

Always replace the side cover before turning on the system because it is an integral part of cooling and airflow requirements.

CAUTIONS:
An electrostatic discharge (ESD) can damage disk drives, add-in boards, and other components. This system can withstand normal levels of environmental ESD while hot-swapping SCSI hard-disk drives.

Add-in boards can be extremely sensitive to ESD and always require careful handling.

Operating the system with the side cover removed can damage the system components. For proper cooling and airflow always replace the side cover before turning on the system.