Jumpers/Switches/Controls: XPS P75/P90/P100 Mini Tower

Jumpers | Switches | Controls

Jumpers

System Board Layout

00000006.gif = pins 1-2 jumped
00000007.gif = pins 2-3 jumped

NOTE: Red dot notes pin 1
75/90 00000009.gif 75/50-MHz processor installed.
75/90 00000010.gif 90/60-MHz processor installed.
75/90 00000011.gif 100/66-MHz processor installed.
ENA/DIS PSWD 00000013.gif (default)

00000014.gif

The password feature is enabled.

The password feature is disabled.
M/C 00000016.gif (default)

00000017.gif

 Color monitor installed.

Monochrome monitor installed.
NRM/CLR 00000019.gif (default)

00000020.gif

System setup settings are retained at next system boot.

System setup settings are cleared at next system boot.
FLASH RCVR/NRM 00000022.gif (default) Reserved. Do not change.
SU 00000024.gif (default)

00000025.gif

Allows the user to enter the system setup program.

Prevents the user from entering the system setup program.

NRM/WP 00000027.gif (default)

00000028.gif

Flash BIOS is not write-protected.

Flash BIOS is write-protected.

Switches

There are no internal configuration switches in this system.

Controls

Front Panel Controls/Indicators

Indicator Definition
Power Switch The power switch is a push-button on/off switch.
Power Indicator The power indicator lights up when the system unit is on.
Reset Button Pressing the reset button initiates a hardware reset. To avoid possible data or file structure corruption, use the reset button only when the system cannot be rebooted with the <Ctrl><Alt><Del> key combination, and close any open applications or files if possible.
Hard-Disk Drive Access Indicator The hard-disk drive access indicator lights up when the hard-disk drive is being accessed.
Diskette-Drive Access Indicators The diskette-drive access indicators light up when the diskette-drive is being accessed.