Setup: HP DeskJet 610 Series Printer User's Guide

Contents of the Box • Installation Steps • Installation Troubleshooting Checklist • Uninstalling the Printer Software

Contents of the Box

Installation Steps

Step 1: Unpack your printer

Step 1a:

Step 1b:

Step 2: Connect the cables

(Connector locations may vary.)

Step 3: Insert the print cartridges

Step 3a:

Step 3b:

Step 3c:

Step 3d:

Step 4: Load paper in your printer

Step 4a:

Step 4b:

Step 4c:

Step 5: Install the printer software

NOTE: If a New Hardware Found box appears at any time during the installation, click Cancel.

1. Insert the CD into your CD drive. After a few seconds, the HP DeskJet opening screen appears.

NOTE: If you do not have a CD drive, please see instructions for making diskettes in the user's guide.

2. If the opening screen does not appear, do the following:
   1. For Windows 95, 98, and NT 4.0, from the taskbar, select Start->Run. For Windows 3.1x, in the Program Manager, select File->Run.
   2. Type the letter of the computer's CD drive followed by

      setup. 

      For example, if your CD drive is drive D, type

      D:\setup

   3. Click OK.
3. Follow the instructions on screen to install your printer software.

Step 6: Align the print cartridges

Step 6a:

Step 6b:

Step 6c:

Step 7: Print a page

Installation Troubleshooting Checklist

• Make sure the printer is turned on and all connections are firm.
• Exit your software program and turn off the computer and the printer. Turn on the printer and then turn on the computer.
• Disable any virus protection programs that are running on your computer.
• Uninstall the printer software using the instructions in the user's guide.
• Try the installation process again.

Uninstalling the Printer Software

If you need to uninstall the printer driver for your HP DeskJet printer for any reason, perform one of the steps listed for your operating system. If something unexpected happened during installation, it is safest to run the uninstall utility directly from the CD rather than from the uninstall program that was placed on your hard drive.

For Windows 3.1x, do one of the following:

• In Program Manager, locate your HP DeskJet Series group. Double-click the Uninstall icon to uninstall your printer software.

-OR-

Insert the CD into your computer and run Setup.exe. Select Remove HP DeskJet 610C Series software.

For Windows 95, Windows 98, and Windows NT 4.0 do one of the following:

• From the Start menu, click Programs, click HP DeskJet 610C Series, and then click HP DeskJet 610 Series Uninstall.

-OR-

• From the Start menu, click Settings, click Control Panel, and then click Add/Remove Programs. Select HP DeskJet 610C Series (Remove only).

-OR-

• Insert the CD into your computer and run Setup.exe. Select Remove HP DeskJet 610C Series software.