Note: If the Emuzed Angel Dual TV Tuner card is already installed, start with Step 4.
If the card is not installed or if you are reinstalling the card follow steps 1 to 9.
For more information refer to the Quick Start Install Guide.
CAUTION: Shut down your computer and unplug the power cord to prevent
any personal or equipment damage.
Step 1: Open the Computer
Remove the cover of the computer (Refer to the owner's manual if you are unsure of how to open the case).
Step 2: Locate an Available PCI Slot
Remove the rear access cover of any free PCI slot (you may need a screwdriver to do this). Save all the screws that you remove.
Step 3: Install the Emuzed Angel Dual TV Tuner PCI Card
Remove the Emuzed Angel Dual TV Tuner PCI card from the protective wrapper.
Hold the Emuzed Angel Dual TV Tuner PCI card by its sides or by its bracket without touching any other metal contacts or components.
Gently but firmly push the Emuzed Angel Dual TV Tuner PCI card into the PCI slot until it is fully seated.
CAUTION: If you encounter any resistance do not force the Emuzed Angel Dual TV Tuner PCI card. Instead, pull out the Emuzed Angel Dual TV Tuner PCI card carefully and try again.
After making sure that the Emuzed Angel Dual TV Tuner PCI card is fully seated into the PCI slot, secure it with the screws that were removed in Step 2.
Replace your computer cover and reconnect its power cord and anything else that you disconnected, such as the monitor etc.
Step 4: Connect a TV cable
Note: If you have a cable box or satellite receiver (set-top box), skip this step.
Connect a TV cable (not included) from the wall to the CATV connector on the TV tuner card of your computer.
Step 5: Connect a cable box or satellite receiver (set-top box)
Connect either a composite video cable , using a supplied adapter, or an S-video cable from the cable TV box or satellite receiver to the VID IN 1 connector on the Emuzed Angel Dual TV Tuner card.
Connect an audio Y-cable from the cable TV box or satellite receiver to the AUD IN 1 connector on the Emuzed Angel Dual TV Tuner card.
If you have a second TV signal input source, repeat steps A and B using the VID IN 2 and AUD IN 2 connectors on the Emuzed Angel Dual TV Tuner card.
Extension cables*
Audio Y-cable*
S-video cable*
Composite video to S-Video adapter
Composite video cable*
* cables not included
When using the Movie Maker application, only VID IN 1 and AUD IN 1, or the cable/antenna should be used as the input.
If the driver and the hardware are not installed or if you need to reinstall them,
perform the following steps:
Step 1:
With Windows® running on your computer, insert the Dell Resource CD into your CD/DVD-ROM drive.
Step 2:
If the Dell Resource CD window does not open automatically, double click on My Computer on your desktop and then double click on the CD/DVD-ROM drive containing the Dell Resource CD.
Step 3:
Follow the instructions provided by the Dell Resource CD to locate the video driver package for your Emuzed Angel Dual TV Tuner card.
Step 4:
Once you have located the package, select the Emuzed setup.exe to unzip the drivers on to the hard drive and install the drivers.
Step 5:
At the Setup Complete screen, select Yes and click Finish to restart your system.
