Manuals

Specifications: Promise FloppyMAX LS-120 Controller Board User's Guide

Specifications: Promise® FloppyMAX LS-120 Controller Board User's Guide

NOTE: These specifications are provided by the manufacturer for information purposes only and do not constitute an extension of Dell's warranty to you. Dell's warranty is contained in the documentation for your system.

Manufacturer	Promise Technology, Inc.
Model	FloppyMAX 120MB LS-120 Controller
Card type	16-bit ISA
Function	LS-120 bootable BIOS
Motherboard support	PCI, VESA, ISA
Device support	LS-120 and/or any IDE/ATAPI device¹
Channel	uses single ISA IDE/ATAPI channel
Port addresses	supports tertiary and quaternary IDE port addresses 1e8H and 168H (default)
IRQs	configurable for IRQ 9, 10 (default), 11 (see "Connectors and Jumpers")
ISA bus speeds	compatible with bus speeds of up to 12 MHz
BIOS addresses	four selectable addresses for on-board BIOS: D000H, D4000H, D8000H (default), DC000H (see "Connectors and Jumpers")
Compatibility	DOS 5.0 and above Microsoft® Windows® 3.1x Microsoft Windows 9x Microsoft Windows NT® 4.0 Microsoft Windows NT 3.51 with Service Pack 5
¹In order for hard-disk drives to work on the FloppyMAX, some source of LBA is required in the system that searches the tertiary/quaternary IDE port addresses.

Please read all restrictions and disclaimers.

Back to Contents Page