*Based on ANSI/NAPM IT7.228-1997 tests of 100 units, October
2003, with average ANSI Lumens 1152. Bulb brightness degrades with usage.
Dell recommends replacing your bulb after 2000 hours usage.
Equipment
Your projector comes with all the items shown below. Ensure that you
have all the items, and contact Dell if anything
is missing.
Main unit
3.0m Power cord
1.8m VGA cable
(D-sub to D-sub)
2.0m S-video cable
1.8m USB cable
1.8m Composite Video cable
1.8m D-sub to YPbPr cable
1.8m RCA to Audio cable
1.8m mini pin to mini pin cable
Remote control
Dell 2200MP Projector
User's Guide
Dell 2200MP Projector Quick Start Card
Warranty Guide
Owner's Manual
Carrying case
Batteries (2)
Main Unit
1
Control panel
2
Zoom tab
3
Focus ring
4
Lens
5
Elevator button
6
Remote control receiver
Control Panel
1
Power button
2
Four directional keys
3
Keystone adjustment
4
Temperature warning light
5
Lamp warning light
6
Resync
7
Menu
8
Keystone adjustment
9
Source
Connection Ports
1
VGA in (D-sub) connector
2
VGA out (monitor loop-through)
3
IR receiver
4
USB connector
5
S-video connector
6
Composite video connector
7
Audio input connector
Remote Control
1
Light
2
Power button
3
Previous Page button (page up)
4
Four Direction buttons
5
Source button
6
Resync button
7
KeystoneCorrection
button
8
Volume button
9
Hide button
10
4:3/16:9 (aspect ratio) button
11
Menu button
12
Next Page button (page down)
13
Video Mode button
Battery Disposal:
Your projector remote control uses zinc-manganese batteries.
If you need to replace the batteries, see your Dell 2200MP Projector
Quick Start Card.
Do not dispose of used batteries along with household waste.
Contact your local waste disposal agency for the address of the
nearest battery deposit site.