The SX2210T flat panel display has an active matrix, thin-film
transistor (TFT), liquid crystal display (LCD). The monitor features include:
■ 21.5 inches (546.8 mm) diagonal.
■ 1920 X 1080 resolution, plus full-screen support for lower
resolutions.
■ Touch sensitivedetects your finger or any other pointing device close to the screen.
■ Tilt adjustment capability.
■ Plug and play capability if supported by your system.
■ On-Screen Display (OSD) adjustments for ease of set-up and screen
optimization.
■ Software and documentation media which includes an information file (INF), Image
Color Matching File (ICM), Touch Screen Tools software, Webcam
Software, Facial Recognition Software, and product documentation.
■ Energy Saver feature for Energy Star compliance.
■ Security lock slot.
■ 2.0 Mega pixel internal webcam with integrated microphone.
If you have VESA's compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as
Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices,
the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:
VESA Modes
Horizontal Sync
Vertical Sync
Video
Power Indicator
Power Consumption
Normal operation and USB active
Active
Active
Active
White
42 W (maximum)
Normal operation
Active
Active
Active
White
28 W (typical)
Active-off mode
Inactive
Inactive
Blanked
Amber
0.84 W
Switch off
-
-
-
Off
0.74 W
NOTE: The OSD functions in the 'Normal operation' mode. One
of the following messages appears when the menu key is
touched in Active-off mode.
or
Activate the computer and 'wake up' the monitor to gain access to the
OSD.
NOTE: This monitor is ENERGY STAR®-compliant.
Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the power adapter.
This section gives you information about the USB ports that are available on
the left side of your monitor.
NOTE:This monitor supports High-Speed Certified USB 2.0 interface
Transfer speed
Data Rate
Power Consumption
High speed
480 Mbps
2.5W (Max., each port)
Full speed
12 Mbps
2.5W (Max., each port)
Low speed
1.5 Mbps
2.5W (Max., each port)
USB Upstream Connector
Pin Number
4-pin Side of the connector
1
DMU
2
VCC
3
DPU
4
GND
USB Downstream Connector
Pin Number
4-Pin Side of the Signal Cable
1
VCC
2
DMD
3
DPD
4
GND
USB Ports
1 upstream at bottom
2 downstream at back & 1 downstream at bottom
NOTE: USB 2.0 functionality requires
a USB 2.0-capable
computer
NOTE: The
monitor's USB interface works only when the monitor is on or in power save mode.
If you turn off the monitor and then turn it on, the attached peripherals may take a few seconds to resume normal functionality.
The integrated USB camera and
analog microphones allow you to take pictures, videos, and communicate with
other computer users. The camera is located at the top of the monitor and is
fixed. When the
camera is on, the white light next to the camera turns on.
Lens
Field of view
66.2 degree +/- 5 %
Focus mode
Fixed Focus
Focus area
37 cm~Infinity
Focusing distance (normal mode)
1.100 mm
Image Sensor
Active array size
2.0 mega-pixel
Video specification
Video frame rate
1600 x 1200 (UXGA) - up to 10 frames per second
640 x 480 (VGA) and below - up to 30 frames per second
Image flip
Horizontally
Audio Specification
Microphone type
Dual Microphone
Interface
USB 2.0 high Speed
System
Requirements
The following are the minimum system requirements for the Dell Webcam Software Suite:
Intel® Pentium® D 3.0 or AMD® Athlon 64 3200+ or higher
Microsoft® Windows® XP Service Pack 2 or Windows Vista® or Windows 7
512 MB RAM (1 GB RAM or higher recommended)
1 GB free hard disk space
Graphic card Intel 945 at least (Independent graphics card recommended)
Available USB 2.0 port or a USB 2.0 hub with external power supply
Dell Webcam Software Suite
The Dell Webcam Software Suite includes the following applications:
Dell TouchCam
Dell TouchCam enables convenient access to all exciting applications to enhance your Dell webcam experience. See Using the Camera for details
Facial
Recognition Software (FastAccess)
Face recognition
technology greatly reduces the need to manually log in with
passwords, while providing superior security and functionality
compared to passwords and other biometrics (for Windows Vista® or Windows 7
only). See Installing
and Using the Facial Recognition Software (FastAccess) for details.
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC)
protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select
different settings if desired. For more information about changing the monitor
settings, see Operating the Monitor.
Analog
RGB, 0.7 Volts +/- 5%, positive polarity
at 75 ohm input impedance
Digital DVI-D TMDS, HDMI, 600mV for each differential line, positive polarity at
50 ohm input impedance
Audio Input and Output signals
Input signal level: 1Vrms without chipping
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on green)
CAUTION: Read and follow the safety
instructions before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor
power cable from the electrical outlet.
For best practices, follow the instructions in the list below while
unpacking, cleaning, or handling your monitor:
To clean your touch screen, use the supplied soft, clean cloth. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed
air. Avoid wiping the top corners of the monitor where the optics are located.
Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any
kind as some detergents leave a milky film on the monitor.
Handle your monitor with care; any scratch on the monitor will show scuff marks.
To help maintain the best image quality on your monitor,
use a dynamically changing screen saver and turn off your monitor
when not in use.
For use
only with power supply DELL, DA65NS4-00.