| Label |
Description |
Use |
1
|
Regulatory rating label |
List the regulatory approvals. |
2
|
Barcode serial number label
|
Refer to this label if you need to contact Dell for technical support. |
| 3 |
VESA mounting holes (100 mm) |
To
mount the monitor. |
| 4 |
Security lock slot |
Use a security lock with the slot to help secure your monitor.
|
| 5 |
Dell soundbar mounting brackets |
To attach the optional Dell Soundbar. |
| 6 |
Stand release button |
Press to release the stand. |
|
 |
|
|
|
Left Side
|
|
Right Side
|
|
|
Label |
Description |
Use |
|
1 |
AC power connector |
To connect the monitor power cable. |
| 2 |
VGA connector
|
To connect your computer to the monitor using a VGA cable.
|
| 3 |
DVI connector |
To connect your computer to the monitor using a DVI cable |
|
4 |
Stand lock |
Disable stand release button and lock stand assembly with fastening a M3 machine screw. |
The following sections give you information about the various power
management modes and pin assignments for the various connectors of your monitor.
If you have VESA's DPM compliance display card or software installed
in your PC, the monitor automatically reduces its power consumption when
not in use. This is referred to as Power Save Mode. If the
computer detects input from keyboard, mouse, or other input devices, the
monitor automatically resumes functioning. The following table shows the
power consumption and signaling of this automatic power saving feature:
E2010H
VESA Modes
|
Horizontal Sync
|
Vertical Sync
|
Video
|
Power Indicator
|
Power Consumption
|
Normal operation
|
Active
|
Active
|
Active
|
Blue
|
26 W
|
Active-off mode
|
Inactive
|
Inactive
|
Blank |
Amber
|
Less than 1 W
|
Switch off
|
- |
- |
- |
Off
|
Less than 1 W
|
E2210H
|
VESA Modes |
Horizontal Sync |
Vertical Sync |
Video |
Power Indicator |
Power Consumption |
Normal operation |
Active |
Active |
Active |
Blue
|
27 W
|
Active-off mode |
Inactive |
Inactive |
Blank |
Amber |
Less than 1 W
|
|
Switch off |
- |
- |
- |
Off |
Less than 1 W |
E2310H
VESA Modes
|
Horizontal Sync
|
Vertical Sync
|
Video
|
Power Indicator
|
Power Consumption
|
Normal operation
|
Active
|
Active
|
Active
|
Blue
|
29 W
|
Active-off mode
|
Inactive
|
Inactive
|
Blank |
Amber
|
Less than 1 W
|
Switch off
|
- |
- |
- |
Off
|
Less than 1 W
|
The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the
following messages will be displayed:
Activate the
computer and monitor to gain access to the OSD.
|
 |
NOTE: Dell E2010H/E2210H/E2310H Flat
Panel monitor is TC003 and ENERGY STAR®-compliant.
Zero power consumption in OFF mode can only be achieved by
disconnecting the main cable from the monitor. |
 |
15-pin D-Sub connector
|
Pin Number |
Monitor Side of the 15-pin Side Signal Cable |
|
1 |
Video-Red |
|
2 |
Video-Green |
|
3 |
Video-Blue |
|
4 |
GND |
|
5 |
Self-test |
|
6 |
GND-R |
|
7 |
GND-G |
|
8 |
GND-B |
|
9 |
DDC +5V |
|
10 |
GND-sync |
|
11 |
GND |
|
12 |
DDC data |
|
13 |
H-sync |
|
14 |
V-sync |
|
15 |
DDC clock |
DVI connector
| Pin Number |
24-pin Side of the
Connected Signal Cable |
| 1 |
TMDS
RX2- |
| 2 |
TMDS
RX2+ |
| 3 |
TMDS
Ground |
| 4 |
Floating |
| 5 |
Floating |
| 6 |
DDC
Clock |
| 7 |
DDC
Data |
| 8 |
Floating |
| 9 |
TMDS
RX1- |
| 10 |
TMDS
RX1+ |
| 11 |
TMDS
Ground |
| 12 |
Floating |
| 13 |
Floating |
| 14 |
+5V/+3.3V power |
| 15 |
Self
test |
| 16 |
Hot
Plug Detect |
| 17 |
TMDS
RX0- |
| 18 |
TMDS
RX0+ |
| 19 |
TMDS
Ground |
| 20 |
Floating |
| 21 |
Floating |
| 22 |
TMDS
Ground |
| 23 |
TMDS
Clock+ |
| 24 |
TMDS
Clock- |
You can install the monitor in any Plug and Play-compatible system.
The monitor automatically provides the computer with its Extended
Display Identification Data (EDID) using Display Data Channel (DDC) protocols
so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.
|
Model number |
Dell E2010H Flat Panel Monitor |
Dell E2210H Flat Panel Monitor |
Dell E2310H Flat Panel Monitor |
| Screen type |
Active matrix - TFT LCD |
Active matrix - TFT LCD |
Active matrix - TFT LCD |
| Panel Type |
TN |
TN |
TN |
| Screen dimensions |
20.0 inches
(20.0-inch wide viewable image size) |
21.5 inches
(21.5-inch wide viewable image size) |
23 inches
(23-inch wide viewable image size) |
Preset display area:
|
442.8 mm (17.4 inches)
249.0 mm (9.8 inches) |
476.6 mm (18.8 inches)
268.1 mm (10.6 inches) |
509.8 mm (20.1 inches)
286.7 mm (11.3 inches) |
| Pixel pitch |
0.277 mm |
0.248 mm |
0.266 mm |
| Viewing angle:
|
170° typical
160° typical |
170° typical
160° typical |
170° typical
160° typical |
| Luminance output |
250 CD/m² (typical) |
250 CD/m² (typical) |
250 CD/m²(typical) |
| Contrast ratio |
1000 to 1 (typical) |
1000 to 1 (typical) |
1000 to 1 (typical) |
| Faceplate coating |
Anti-glare |
Anti-glare |
Anti-glare |
| Backlight |
2 CCFL edgelight system |
2 CCFL edgelight system |
2 CCFL edgelight system |
| Response Time |
5ms typical |
5ms typical |
5ms typical |
|
Color Gamut |
72% (typical) |
72% (typical) |
72% (typical) |
*Dell E2010H/E2210H/E2310H Flat Panel monitor color gamut (typical) is based on CIE 1976 (83%) and CIE1931
(72%) test standards.
Resolution
Specifications
|
Model number |
Dell E2010H/E2210H/E2310H Flat Panel Monitor |
|
Scan range
|
30 kHz to 83 kHz (automatic)
50 Hz to 75 Hz (automatic) |
| Maximum preset resolution |
1600 x 900 at 60 Hz (For E2010H)
1920 x 1080 at 60 Hz (For E2210H/E2310H) |
Electrical Specifications
|
Model number |
Dell E2010H/E2210H/E2310H Flat Panel Monitor |
| Video input signals |
Analog RGB: 0.7 Volts
+/-5%, 75 ohm input impedance |
| Synchronization input signals |
Separate horizontal and vertical synchronizations,
polarity-free TTL level.
|
| AC input voltage / frequency / current |
100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A
(Max.) |
| Inrush current |
120V:30A (Max.)
240V:60A (Max.) |
|
|
The following table lists the preset modes for which Dell guarantees image size and centering:
Display Mode
|
Horizontal Frequency (kHz)
|
Vertical Frequency (Hz)
|
Pixel Clock (MHz)
|
Sync Polarity (Horizontal/Vertical)
|
VESA, 720 x 400
|
31.5
|
70.0 |
28.3
|
-/+
|
VESA, 640 x 480
|
31.5
|
60.0 |
25.2
|
-/-
|
VESA, 640 x 480
|
37.5
|
75.0
|
31.5
|
-/-
|
VESA, 800 x 600
|
37.9
|
60.0
|
40.0 |
+/+
|
VESA, 800 x 600
|
46.9
|
75.0
|
49.5
|
+/+
|
VESA, 1024 x 768
|
48.4
|
60.0
|
65.0
|
-/-
|
VESA, 1024 x 768
|
60.0
|
75.0
|
78.8
|
+/+
|
| VESA, 1152 x 864 |
67.5 |
75.0 |
108.0 |
+/+ |
VESA, 1280 x 1024
(For E2210H/E2310H) |
64.0 |
60.0 |
108.0 |
+/+ |
VESA, 1280 x 1024
(For E2210H/E2310H) |
80.0 |
75.0 |
135.0 |
+/+ |
VESA, 1600 x 900
(For E2010H)
|
55.5 |
60.0 |
97.8 |
+/- |
VESA, 1920 x 1080
(For E2210H/E2310H) |
67.5 |
60.0 |
148.5 |
+/+ |
|
The following table lists the monitor physical characteristics:
| Model Number |
Dell E2010H Flat Panel Monitor |
Dell E2210H Flat Panel Monitor |
Dell E2310H Flat Panel Monitor |
| Connector type |
15-pin D-subminiature, blue
connector; DVI-D, white connector |
15-pin D-subminiature, blue
connector;DVI-D, white connector |
15-pin D-subminiature, blue
connector; DVI-D, white connector |
| Signal cable type |
Analog: Detachable, D-Sub, 15pins, shipped
attached to the monitor
Digital: Detachable, DVI-D, Solid pins, shipped detached from
the monitor |
Analog: Detachable, D-Sub, 15pins, shipped
attached to the monitor
Digital: Detachable, DVI-D, Solid pins, shipped detached from
the monitor |
Analog: Detachable, D-Sub, 15pins, shipped
attached to the monitor
Digital: Detachable, DVI-D, Solid pins, shipped detached from
the monitor |
| Dimensions: (with stand)
|
363.2 mm (14.30 inches)
481.2 mm (18.94 inches)
151.9 mm (5.98 inches) |
381.0 mm (15.00 inches)
515.0 mm (20.28 inches)
158.9 mm (6.26 inches) |
401.8 mm (15.82 inches)
548.8 mm (21.61 inches)
164.0 mm (6.46 inches) |
| Dimensions: (without stand)
|
287.6 mm (11.32 inches)
481.2 mm (18.94 inches)
60.0 mm (2.36 inches) |
306.5 mm (12.07 inches)
515.0 mm (20.28 inches)
64.5 mm (2.54 inches) |
325.7 mm (12.82 inches)
548.8 mm (21.61 inches)
63.5 mm (2.50 inches) |
| Stand dimensions:
|
289.3 mm (11.39 inches)
250.9 mm (9.88 inches)
158.9 mm (6.26 inches) |
298.3 mm (11.74 inches)
258.9 mm (10.19 inches)
158.9 mm (6.26 inches) |
310.8 mm (12.24 inches)
265.9 mm (10.47 inches)
164.0 mm (6.46 inches) |
| Weight with packaging |
6.35 kg (14.00 lbs)
|
6.54 kg (14.38 lbs)
|
6.76 kg (14.87 lbs)
|
| Weight with stand assembly and cables |
4.85 kg (10.67 lbs)
|
5.11 kg (11.24 lbs)
|
5.76 kg (12.67 lbs)
|
Weight without stand assembly
(For wall mount or VESA mount considerations - no cables) |
3.50 kg (7.7 lbs) |
3.59 kg (7.90 lbs) |
4.10 kg (9.02 lbs) |
| Weight of stand assembly |
0.94kg (2.07 lbs) |
1.00 kg (2.20 lbs) |
1.14 kg (2.51 lbs) |
|
|
The following table lists the environmental conditions for
your monitor:
| Model Number |
Dell E2010H/E2210H/E2310H Flat Panel Monitor |
| Temperature
|
0° to 40°C (32° to 104°F)
Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F) |
| Humidity
|
10% to 80% (non-condensing)
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90%(non-condensing) |
| Altitude
|
3,657.6 m (12,000 ft) max
12,192 m (40,000 ft) max |
| Thermal dissipation |
E2010H:
102.5 BTU/hour (maximum)
88.8 BTU/hour (typical)
E2210H:
130.0 BTU/hour (maximum)
106.0 BTU/hour (typical)
E2310H:
136.8 BTU/hour (maximum)
112.8 BTU/hour (typical)
|
|
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.When the pixel remains permanently lit, it is known as a “bright dot.” When the pixel remains black, it is known as a “dark dot.”
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered normal and within competitive standards. For more information, see Dell Support site at: support.dell.com.
|
|
CAUTION: Read and follow the safety instructions before
cleaning the monitor. |
|
|
CAUTION: Before cleaning the monitor, unplug the monitor power
cable from the electrical outlet. |
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
- To clean your antistatic
screen, slightly dampen a soft, clean cloth with water. If possible, use
a special screen-cleaning tissue or solution suitable for the antistatic
coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or
compressed air.
- Use a slightly dampened, warm
cloth to clean the plastics. Avoid using detergent of any kind as some
detergents leave a milky film on the plastics.
- If you notice a white powder
when you unpack your monitor, wipe it off with a cloth. This white
powder occurs during the shipping of the monitor.
- Handle your monitor
with care as a darker-colored monitor may scratch and show white scuff
marks more than a lighter-colored monitor.
- To help maintain the best
image quality on your monitor, use a dynamically changing screen saver
and power off your monitor when not in use.
Back to Contents Page |
