Dell recommends the customer review specifics about the update to determine if it applies to your system. The update contains changes that impact only certain configurations, or provides new features that may/may not apply to your environment.
Compatibility
Systems
Operating systems
Latitude D500 Latitude V710 Latitude 100L Latitude X300 Latitude V740 Latitude D400 Latitude D410 Latitude D505 Latitude D600 Latitude D610 Latitude D800 Latitude 110L Latitude D510 Latitude D810 Dell Precision WorkStation 380 Dell Precision Mobile WorkStation M70 Latitude X1 OptiPlex GX280 OptiPlex GX520 OptiPlex GX620 OptiPlex GX270 OptiPlex GX270N OptiPlex GX60 OptiPlex GX60N OptiPlex SX270 OptiPlex SX270N OptiPlex 160L OptiPlex 170L OptiPlex 170LN OptiPlex GX260 OptiPlex GX260N OptiPlex L60 OptiPlex SX260 OptiPlex SX280 Dell Precision Mobile WorkStation M20 Dell Precision Mobile WorkStation M60 Dell Precision WorkStation 340 Dell Precision WorkStation 360 Dell Precision WorkStation 360N Dell Precision WorkStation 370 Dell Precision WorkStation 450 Dell Precision WorkStation 450N Dell Precision WorkStation 470 Dell Precision WorkStation 650 Dell Precision WorkStation 650N Dell Precision WorkStation 670
Microsoft Windows 2000 Microsoft Windows XP
Fixes and Enhancements
Changes from 7.0.1 to 7.1:
Additional Features - Inserted support for the monitor serial number. - Separate alerts are now given for memory increased and memory decreased. - The polling frequency for hard drive alerts (SMART errors and low freespace) have been increased from once per 1 minute to once per 4 hours. The former rate did not permit the hard drive to spin down. - The hard drive freespace threshold has been upgraded so that it is now a percentage of the hard drive size and is not applied to drives below a certain size. The percentage upper limit enables applications to drives of widely varying size. The lower threshold enables small devices, such as USB flash drives, to be excluded from the alert. Consult the OMCI User’s Guide for more information. - Support for enabling/disabling Hyperthreading has been added. - Support for enabling/disabling wireless control has been added. - Support for setting Enable Keypad to various values has been added. - The MOF files are now certifiable against CIM schema ver 2.6.
Bug Fixes - An OMCI alert is no longer given when a system resumes from S4 (sleep 4 state). - OMCI can now reboot or shutdown a system running a password protected screen-saver. - Memory and hard drive size are now shown correctly by OpenManage Client Connector. - A reporting error with the SCSI SMART drive alerting has been fixed.
Installation Instructions
Hard Drive Installation (via WinZip) with Setup.exe File for R74660.EXE
Download
1.Click Download Now, to download the file. 2.When the File Download window appears, click Save (Windows XP users will click Save) this program to disk and click OK. The Save In: window appears. 3.From the Save In: field, click the down arrow then click to select Desktop and click Save. The file will download to your desktop. 4.If the Download Complete window appears, click Close. The file icon appears on your desktop.
Install
1.Double-click the new icon on the desktop labeled R74660.EXE. 2.The Self-Extracting window appears and prompts you to extract or unzip to C:\DELL\DRIVERS\r74660. Write down this path so the executable (I.e. Setup.exe) file can be found later. 3.The Self-Extractor window appears. 4.Click OK. 5.After completing the file extraction, if the Self-Extractor window is still open, close it. 6.Click the Start button and then click Run. 7.Type C:\DELL\DRIVERS\r74660 in the Open textbox and then click OK. 8.Follow the on-screen installation instructions.
