To download the latest Axim ROM patch:

1. Browse to the Drivers and Downloads page.

2. Click

   Enter a Tag

    to use your Service Tag to find the driver.
   
   

   	Note:
   	If the Service Tag is not available, click   Select Model and select the appropriate Product Type and Product Model.

3. Click Go.

4. Select the desired operating system, driver language, category, and importance settings from the drop-down boxes (Figure 1).

   Operating System:   Windows Mobile 5.0 Driver Language:   English Category:   All Importance:   All

   Figure 1: Drivers and Downloads Drop-Down Selections 

5. Select the System Utilities then the Dell-Driver from the column labeled File Title to display the download page (Figure 2).

   File Title

   Importance

   Figure 2: File Title Column 

6. Review the information on the page and take note of Installation Instructions and Important Information.

7. Click Download Now. You may receive a warning and an option to run or save the file.

8. Click Save.

9. When the Save As window appears, designate a folder to save the file that is being downloaded and click Save. The download progress window displays.

10. When the download is complete, follow the instructions provided in the Installation Instructions.

To update the Dell™ Axim™ X51 or X51v to the latest ROM, perform the following steps:

1. Locate the file that you downloaded to your system in the preceding step.
   
   
2. Double-click the icon for the file.
   
   
3. When the  Dell Axim System Update window appears, click the Update ROM button (Figure 1).

   
   Figure 1: ROM Pre-Update Notice

4. Click Next.

5. Click Next on the current system information and update information window (Figure 2).
   
   
   Figure 2: ROM Information Window

6. Click Continue to confirm that all data on your Axim is erased and that the AC adapter is connected and the system runs the ROM update. A window appears stating that the ROM start-up section update is complete (Figure 3).

   
   Figure 3: Start-up Section Completion Message

7. With the Axim still docked, perform a hard reset of the device by holding the Power and Reset buttons simultaneously, the Restore Factory Defaults screen flashes briefly, then the Axim reboots, and Activesync tries to connect and sync as normal.
   
   
8. Minimize the Activesync screen and switch to the Update Utility to continue the ROM update.
   
   
9. Click Continue to start the RUU Update sequence.
   
   
10. Click Exit to quit the update application and the Axim displays the Dell logo and enters the operating system.